Old FIRST Kit Motor spec sheet needed (Belimo - 2000-2002?)

[Elgin Clock]

I am looking for the spec sheet for the Old Torque Motor that was in the KOP around 2000-2002



I have Model #LM24-M us
That's what it looks like basically.

Any help would be appreciated. Thanks.

[Bill Moore]

Originally Posted by Elgin Clock

I am looking for the spec sheet for the Old Torque Motor that was in the KOP around 2000-2002



I have Model #LM24-M us
That's what it looks like basically.

Any help would be appreciated. Thanks.

Have you checked their current Technical Documentation? The product might not have changed much. Check out Page 166.

[Elgin Clock]

Originally Posted by Bill Moore

Have you checked their current Technical Documentation? The product might not have changed much. Check out Page 166.

I did at one time, but not from that link you supplied since it is now broken(?).

Anyways, I could never find #LM24-M. I found others, but not that one.

I think this Motor is circa. 2000ish, and have one place I can check.

In the mean time, anyone else have any clues?

[Al Skierkiewicz]

What you are looking at is a Belimo Special Application Actuator from the 2001 KOP. Stated torque is 35 in/lb with 95 degrees of maximum rotation. The torque is relatively high but the speed is tortise like at 80-110 seconds for the complete rotation. The data sheet is included in the robot-pt3.pdf from that year. If you need the file let me know and I can e-mail it.

[Al Skierkiewicz]

Justin,
Here is the image from the PDF. I hope you can read it all.