|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
I know this has probably been posted already, but I just couldn't find it. But when the Pan servo is connected to the camera. In demo mode it turns to the left and sticks their until you go in the java file and set the servo to 0 and it go to the center but will not go to the right. Please Help!!!
![]() |
|
#2
|
||||
|
||||
|
Re: Pan Turning To the left
Alright.....here is what is going on....you do not have your servos properly calibrated.....use the software to put your servos at the neutral/middle state which is 127, take the screws out that hold the plastic rotating servo plates and move your arm to the position you want it. If that doesnt make sense or help...let me know.... Johnbk14@gmail.com
When you put it all together, and turn on the power it goes to where the neutral state or middle state should be..... Hope that Hlelps - Team 1506 programmer John K. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Turning Left and right | reilly | Motors | 2 | 18-02-2005 11:35 |
| Autonomous Camera Integration | GregC | Programming | 2 | 06-02-2005 14:34 |
| Canadian fined for turning left while on his Segway | MrToast | Dean Kamen's Inventions | 2 | 21-10-2004 17:34 |
| Using an FRC with the RCX? | Astronouth7303 | Programming | 21 | 15-04-2004 14:14 |
| Speed limiting code from last year in C? | Josh Siegel | Programming | 6 | 01-04-2004 22:27 |