|
|
|
 I'm not basing success on winning a regional. Success is learning by building the best system you can. In the engineering industries, the best system is the one chosen. - AdamHeard [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
"Error.MCP" file after HEX file trans
hi guys, hope you can help me out with this. I changed some code around for a gear tooth sensor, then attempted to transfer the file to the RC. The file transfers properly however, after the transfer is completed a get a file name "ERROR.MCP" come up in notepad. It has a bunch of (im guessing) hex values in it. Has anyone ever seen this before? If so, how do i fix it? thanks
--iwdu15 --team 811 |
|
#2
24-01-2007, 20:05
|
||||||
|
||||||
|
Re: "Error.MCP" file after HEX file trans
Most likely you are using an old version of the IFI Loader. Download the latest version from http://ifirobotics.com/rc.shtml
If you had searched for "error.mcp" on these forums or the IFI forums, you would have found the answer more quickly. If this isn't your problem, then only IFI will be able to help you, and they'll likely need the exact hex dump. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| On compile: "Coff file format for 'ifi_library.o' is out of date." | Ethulin | Programming | 11 | 17-01-2007 18:03 |
| Strange ERROR.MCP file coming up Robot not programming! | Salik Syed | Programming | 5 | 08-05-2006 21:46 |
| Code error on RC after downloading "bells and whistles" version of Kevins camera code | DanDon | Programming | 6 | 10-01-2006 18:07 |
| IFI Loader problem - "Invalid HEX file" | wun | Programming | 9 | 22-09-2004 12:35 |
| How do we convert a modified user routines file into a valid .HEX file | HuskieRobotics | Programming | 13 | 28-02-2004 12:12 |
Hybrid Mode
