Banebot transmission no longer COTS?

[flightofone]

Given that the KOP Banebot transmission has/will not been available for purchase for two weeks, that exceeds the limits in the VENDOR criteria for COTS. Does that mean we are now limited to no more than two Banebot transmissions in our robot? Exactly how long does a part need to be "Out of stock" to no longer be COTS?

[MrForbes]

The Robot Rules definition of VENDOR seems to cover this situation....meaning that the Banebot transmission is still COTS.

I would give a quote, except that the .pdf thing gets in the way of my doing so.

[flightofone]

From my reading of the rules it seems atypical delays are okay (meaning longer than 5 days) as long as they do not impact the teams ability to complete the robot. In our case, a delay much longer than the expected restocking of Feb 7th will definitely impact our ability to complete the robot. At what point does the part cease becoming COTS? Feb 14th? Feb 21st?

The VENDOR must be normally able to ship any general (i.e., non-FIRST unique) product within five business days of receiving a valid purchase request.

It is recognized that certain unusual circumstances (such as 1,000 FIRST teams all ordering the same part at once fromthe same VENDOR) may cause atypical delays in shipping due to backorders for even thelargest VENDORS. Such delays due to higher-than-normal order rates are excused.
Note that the intent here is to protect the teams against long delays in availability of parts that will impact their ability to complete their ROBOT. The FIRST Robotics Competition build season is only six weeks long, so the VENDOR must be able to get their product, particularly FIRST unique items,
to a team in a timely manner.

...business should maintain sufficient stock or production capability to fill teams orders within a reasonable period during the build season (less than 1 week).

[Dan Richardson]

This would be considered an abnormal delay such as 1000 teams ordering at the same time I would imagine. It is unfortunate that they were unprepared for the challenge.

I imagine that you should cancel your order and start looking for other options. AndyMark.biz has a wide variety of great parts and deals. They are a slight bit more expensive in some areas but what adds in price picks up in quality of service and product. Or adapt to a product they do have readily available and make a change on your side.

Also if its a more standard part ( like spares/allowable added usage ) of what came in the kit, contact local teams or make a post on these forums to see whether or not people are not using theres and make a trade/purchase them from the team.

We ordered from banebots and got our components right on time, now just to get them on the robot and hope that the same mechanical problems don't occur.

[Justin M.]

We MAY have one for sale, cheaply. One of our transmissions has a stripped screw (and we ordered an replacement)....for about $40 I'll be willing to sell it off, maybe. Never had a motor bolted up to it - you would just have to get off that screw.

[Tristan Lall]

Also, consider the updated version of <R28> (from Update #2) which allows no-longer-available COTS items, as long as they are unmodified and in their original condition:

Originally Posted by <R28>

<R28> COTS ITEMS that are generally available may be used on the ROBOT. COTS ITEMS from ROBOTS entered in previous FIRST competitions or COTS ITEMS that are no longer commercially available may be used under the following conditions:

• The item must be unmodified, and still in its original condition as delivered from the VENDOR
• The item must not be a part custom made for the FIRST competition and provided in a previous FRC Kit Of Parts (e.g. 2006 FRC transmissions, custom-made motor couplers, custom sensor strips, IFI CMUcam II modules, etc. are not permitted)
• The item must satisfy ALL of the rules associated with materials/parts use for the 2007 FIRST Robotics Competition.

[AdamHeard]

Also..... no matter wether or not it can be bought... It is a KOP item and is therefore legal. The gray area would be in using more than two; IMO this is still legal.

[Justin M.]

I HOPE that using 4 can still remain legal. The delay is long, but still feasible. I'm also pretty sure that FIRST is working with BaneBots to get these transmissions back out on sale ASAP. Otherwise, we have to hope the AndyMark transmissions have the same bolt patterns....

[lopz056]

sorry if it might seem a little off topic, but all of the other threads talking about transmissions have been closed, i need to know if anyone knows of any problems with the 16:1 banebot transmissions, any information of problems with them would be very much appreciated, 1388

you can email me at fortyniner_fan056@yahoo.com if you do have any information

[Joe Johnson]

Originally Posted by lopz056

sorry if it might seem a little off topic, but all of the other threads talking about transmissions have been closed, i need to know if anyone knows of any problems with the 16:1 banebot transmissions, any information of problems with them would be very much appreciated, 1388

you can email me at fortyniner_fan056@yahoo.com if you do have any information

There is a ton of information and history here: Banebots 56mm Transmission -- DD related

That thread was getting way too long and it had a lot of information that was spread out over too many messages, so I close that one and started this one: Banebots 56mm Transmission -- DD RELOADED.

If you just want to know what the latest is, use the second link.

Joe J.

[Justin M.]

BaneBots is also out of the 256:1 42mm gearbox. We need two of these...dual 64:1 won't hold up. Does anyone know if BaneBots will EVER get these in stock anytime soon?