pic: 166 CIM Support Bracket on 56mm transmissions

Dan Petrovic · #1 28-01-2007, 13:53

Nate Laverdure · #2 28-01-2007, 13:54

This is a marketable product. I'd buy two of those, if you sold them cheap enough.

NOV8R · #3 28-01-2007, 15:32

Thats how we are supporting our CIMs. Don't you just love hose clamps

Barry Bonzack · #4 28-01-2007, 16:24

Now thats pretty slick. It would be nice to have something like that in the KOP. We are using the two-motor adapter, so we'd have to modify something like that. we just put two blocks of alumninum under the mounting plate that came in the KOP and plan to connect the two transmissions together with L brackets on top.

chris31 · #5 28-01-2007, 17:14

We are doing something similar just not as pretty.

Dan Petrovic · #6 28-01-2007, 18:42

I'll see about getting drawings to anyone who wants them.

It doesn't take much effort to do this. You really only need a drill press and a bandsaw to do this. We did it with a CNC merely because we have the capability.

I'm not exactly sure how you'd do the slot without a CNC, though.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: 166 in the water	Dan Petrovic	Extra Discussion	5	18-09-2006 15:11
pic: 166 Before and After: All in Two Hours	Dan Petrovic	Extra Discussion	3	30-06-2006 16:43
pic: Scorpio - 166 - 2006	Dan Petrovic	Robot Showcase	11	24-02-2006 08:09
pic: 1992 champs bracket	AmyPrib	Extra Discussion	14	14-11-2005 00:24
pic: 98 Natls Bracket 1	AmyPrib	Extra Discussion	5	07-11-2005 01:42