|
|
|
 Swisscheeseafy - Cutting holes in the robot to decrease weight - alithanar8 [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Swisscheeseafy - Cutting holes in the robot to decrease weight - alithanar8 [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#2
29-01-2007, 22:39
|
|||||
|
|||||
|
Re: SIM motors
The small CIM weighs about 2.5 pounds, and the large minibike motor weighs around 5 pounds. And for future reference, the motor is a CIM motor, not a SIM motor.
|
|
#3
29-01-2007, 22:45
|
|||||
|
|||||
|
Re: SIM motors
Quote:
Small CIM (The one with the nice round housing):1290 grams (2.8 pounds) Large CIM (the one with the oddly shaped housing and the belt pulley): 2405 grams (5.3 pounds) By the way, if you haven't already, appoint someone to keep track of the weight. EVERY part that needs to be weighed should pass through this person and his scale before assembly (and then the assemblies should be weighed to verify the weight). Ideally, the finished robot should be weighed before ship, but this is not always possible. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Using MPLAB SIM | koenig3456 | Programming | 5 | 11-02-2008 14:39 |
| All teams need competition port sim | coldabert | Electrical | 12 | 21-03-2006 22:38 |
| Motors, Motors, and More Motors | 1033missions | Motors | 1 | 09-02-2006 18:46 |
| MPLAB SIM debugger Questions | Chris_Elston | Programming | 2 | 16-01-2005 11:28 |
| using the MPLAB IDE MPLAB SIM simulator | WizardOfAz | Programming | 1 | 03-11-2003 01:24 |
Hybrid Mode
