|
|
|
 FIRST, in itself, will not make you an engineer. - RogerR [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| FIRST, in itself, will not make you an engineer. - RogerR [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Radio problem
We have been running our robot with a Tether and hooked up our radios today and they bot stay on standby is there something we need to do to make one transmit and one receive
|
|
#2
31-01-2007, 22:48
|
||||
|
||||
|
Re: Radio problem
Make sure you have the one labeled robot controller on the robot and the one labeled operator on the operator board.
|
|
#3
31-01-2007, 23:05
|
|||||
|
|||||
|
Re: Radio problem
Do not change your team number from the default until you have it tethered. And if your changing the channel your team number needs to be above 2048 if i remember right. Sometimes i have found you have to dis-connect the robot radio-modem while your tethered and then reconnect it, and it majically starts working.
But i would keep it on channel 40 and just change the team number. Also check for bad cables. Other than that i am not sure. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2007 Radio link reliability problem | Dave K. | Control System | 12 | 02-02-2007 22:26 |
| Radio Problem on FRC | TuaMater | Control System | 4 | 26-01-2006 07:32 |
| Radio Modems | ChuckDickerson | Control System | 4 | 09-11-2005 16:31 |
| radio problem | Anton | Control System | 1 | 19-02-2005 12:22 |
| need 2003 radio/help with old radio | MaxM | Technical Discussion | 2 | 04-01-2004 15:31 |
Hybrid Mode
