Who's the best vendors for getting 25 chain and sprockets?

waialua359 · #1 08-01-2008, 17:45

We've never used them for awhile and want to use it this year.
MSC seemed to have a limited selection and plastic ones.
Thanks.

DonRotolo · #2 08-01-2008, 18:01

I have found http://www.thebigbearingstore.com/ to have good prices on chain. I bought the sprockets from http://www.mcmaster.com/ because they have a good selection, but they are not the least expensive.

Surplus Center has great prices and good availability, but I have never bought from them.

Don

EricH · #3 08-01-2008, 18:01

AndyMark has #25 sprockets.

waialua359 · #4 08-01-2008, 18:05

thanks guys.
I know about andymark but the sizes are limited.
We were looking for 10 tooth and 85-100 tooth sprockets.

waialua359 · #5 08-01-2008, 20:41

our quick research shows that SDP-SI is who we are going to go through.

jgannon · #6 08-01-2008, 22:17

I bought a ton of #25 chain from this surplus store a couple months back. It only comes in 23" pieces, but each piece comes with a master link. Their price is about 1/3 of what it costs to get it from McMaster, so I was pretty pleased.

http://www.goldmine-elec-products.co...?number=G13605

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gears or chain and sprockets?	fredliu168	FIRST Tech Challenge	8	25-12-2006 01:15
Sprockets and Chain	MechaJag	Kit & Additional Hardware	4	08-02-2004 22:45
Who's got the best bot	Raul@13	Robot Showcase	17	14-02-2003 12:14
Sprockets and Roller Chain Models	Madison	Inventor	3	04-02-2003 11:51
Nylon Roller Chain Sprockets	Jim Smith	Technical Discussion	6	20-01-2003 20:01