|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Field-Oriented Mecanum Drive
An interesting idea I had:
http://web.mit.edu/first/www/semiOLcontrol.pdf Should give a non-drifting absolute heading. The trig for rotating frame of reference is done off-board to save processor time, sent as analog signals of the sin and cos. This way, all the math done on the RC is straight multiplication. It looks closed-loop, but it's actually more of an open-loop controller, in that you still trust the Mecanum algorithm to do what it is supposed to do. So, proper weight balance and such still important. The only direct feedback is to cancel out undesired rotation, which seems to be the biggest problem with Mecanum drive. Feasible? I know I've seen field-oriented drive before. Any tips? Anyone tried something similar with success? |
|
#2
|
|||||
|
|||||
|
Re: Field-Oriented Mecanum Drive
This looks pretty feasible.
I like the idea of outsourcing all of the heavy math to a co-processor. The flow chart makes it very clear. If we hadn't vowed not to use mecanum this year, I think I'd give this a try Jacob |
|
#3
|
||||
|
||||
|
Re: Field-Oriented Mecanum Drive
Looks slick.
Using look-up tables for the trig functions, it's not hard to do this in code if you want to go that direction. |
|
#4
|
||||
|
||||
|
Re: Field-Oriented Mecanum Drive
Team 190 did a field oriented control system with mechanum drive for the 2k4 competition. One of the most important things is keeping all 4 wheels on the ground at all times. I wasn't too involved with the system that year, but some of the others on the team might be able to fill you in.
Last edited by Matt C : 15-01-2008 at 11:32. |
|
#5
|
||||
|
||||
|
Re: Field-Oriented Mecanum Drive
Quote:
Last edited by ZZII 527 : 15-01-2008 at 12:17. |
|
#6
|
||||
|
||||
|
Re: Field-Oriented Mecanum Drive
Looks nice. We got pretty decent field-oriented control with a magnetic compass last year. (Although the bot went crazy every time we drove by this one locked door in the hallway at school.)
|
|
#7
|
||||
|
||||
|
Re: Field-Oriented Mecanum Drive
Yea, was 2k5, I was getting years confused.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mecanum Drive - Help | Smoking_Gun | Programming | 22 | 04-12-2007 20:51 |
| Field oriented holonomic code? | chaoticprout | Programming | 4 | 24-01-2007 23:09 |
| mecanum drive system | Charger_07 | Technical Discussion | 5 | 23-01-2007 19:20 |
| Mecanum Drive Technique | Dan Petrovic | Technical Discussion | 9 | 16-08-2006 20:42 |
| pic: Jester Drive:Mecanum Wheel Drive Train | Ken Delaney 357 | Technical Discussion | 64 | 29-03-2006 22:16 |