pic: 114, completed component?

loading photo ...

[mattotters]

I wana guess 4 wheel steerin?

[TubaMorg]

That's a cool looking hoo-ha

[=Martin=Taylor=]

I call bluff. But I could be wrong!





(These are the same modules they used in 2005)

Originally Posted by Hachiban VIII

I call bluff. But I could be wrong!





(These are the same modules they used in 2005)

Very nice. Yeah, that's true about the crab module. But a lot of real components are in this picture...

[sdcantrell56]

SO you're finally doing the crab! COOL

[Alex.Norton]

No that looks like an old module. I think hes lying here somewhere...

Those also look like those plates which are supposedly not for the drive train. I'm betting the arm has some wheel assembly on it but the robot isn't a crab drive.

[Mike Nawrot]

The wheels seem a bit worn to me...

[Otaku]

Originally Posted by Mike Nawrot

The wheels seem a bit worn to me...

They could be waiting for the real wheels to arrive.

[EricH]

Originally Posted by Alex.Norton

No that looks like an old module. I think hes lying here somewhere...

Those also look like those plates which are supposedly not for the drive train. I'm betting the arm has some wheel assembly on it but the robot isn't a crab drive.

Yeah, but those plates aren't on the '05 robot, and the chassis, it could be argued, is not part of the drivetrain. Crab drive it is, unless they put a crab module into a 6-wheel wheel slot. Come to think of it...

Nice one, Craig! Either this picture or this one is a fake! (And, I'm betting it's this one, due to the fact that that box tubing has enough space for a wheel in each slot.) 6-wheel drive, no swerve.

[Scott Morgan]

I'm betting they're stationary supports for a single stage arm, and the end plates are part of a tensioning system similar to what team 60 uses on their arms.

[Otaku]

Originally Posted by EricH

Yeah, but those plates aren't on the '05 robot, and the chassis, it could be argued, is not part of the drivetrain. Crab drive it is, unless they put a crab module into a 6-wheel wheel slot. Come to think of it...

Nice one, Craig! Either this picture or this one is a fake! (And, I'm betting it's this one, due to the fact that that box tubing has enough space for a wheel in each slot.) 6-wheel drive, no swerve.

Design changes are always a viable option =p

Originally Posted by EricH

Yeah, but those plates aren't on the '05 robot, and the chassis, it could be argued, is not part of the drivetrain. Crab drive it is, unless they put a crab module into a 6-wheel wheel slot. Come to think of it...

Nice one, Craig! Either this picture or this one is a fake! (And, I'm betting it's this one, due to the fact that that box tubing has enough space for a wheel in each slot.) 6-wheel drive, no swerve.

Very nice! Actually, the link you posted was going to be our drive base, until we changed around the design to a totally modular system. So the real question here is, which component that I posted is the real one?

Originally Posted by Scott Morgan

I'm betting they're stationary supports for a single stage arm, and the end plates are part of a tensioning system similar to what team 60 uses on their arms.

Noope.

[Otaku]

I'm pretty convinced they're doing crab/swerve drive. I've been talking to Craig a lot and he keeps bringing it up and seeming pretty excited about it. Not to mention... why wouldn't you use it this year? It's a great drivetrain for mobility.

[114Klutz]

This looks familiar.

http://www.chiefdelphi.com/media/photos/19649