Easier shifting?

free2be641 · #1 04-02-2008, 18:31

Is there a way to make the Chiaphua motor and the Dewalt XRP Transmission easier to shift?

Teched3 · #2 04-02-2008, 20:17

Take out the detent spring that positions the black speed selector. Also, use high torque servos.

Madison · #3 04-02-2008, 20:25

Quote:

Originally Posted by Teched3

Take out the detent spring that positions the black speed selector. Also, use high torque servos.

We're allowed only two types of servos per the rules, no? The Hitec servos are spec'd in the white paper. The other type that's allowed, from VEX, requires some work to mount and interface with the transmissions.

Ozeaden · #4 04-02-2008, 20:27

Quote:

Originally Posted by M. Krass

We're allowed only two types of servos per the rules, no? The Hitec servos are spec'd in the white paper. The other type that's allowed, from VEX, requires some work to mount and interface with the transmissions.

That is exactly what we are using, the hitec servos. Im on the same team as free2be641. I also have a topic about it in tech discussion.

Ozeaden · #5 06-02-2008, 18:35

We got it answered on the other post i put up.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Making Debugging Easier	dm0ney	Programming	18	10-04-2005 23:32
Turning; easier one way or the other?	FizMan	Technical Discussion	14	03-07-2004 14:03
Making your robot drive easier	ufa_mike	Control System	32	28-04-2004 21:35
Team Communication - Making it easier	Balbinot	Website Design/Showcase	3	10-02-2004 13:50
Let's make it easier for the rookies	archiver	1999	14	23-06-2002 23:00