80 Inch Cylinder Question

pakratt1991 · #1 05-02-2008, 00:59

Does the 80 Inch Cylinder that your robot has to fit in while playing include the robots bumpers?

Vikesrock · #2 05-02-2008, 01:02

As mentioned in may other threads the 80" cylinder is an example the rule only requires all horizontal measurements be less than 80".

Having said that, the bumpers do count in this measurement.

Ted-Werd · #3 12-02-2008, 13:33

Where precisly is that "80 inch" measurement defined in the rules?

EricH · #4 12-02-2008, 13:35

Quote:

Originally Posted by Ted-Werd

Where precisly is that "80 inch" measurement defined in the rules?

<R16>. Ignore the parenthetical example; there are cases that violate it but still satisfy the rule.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
80" inch rule	m1k3	Technical Discussion	9	29-01-2008 16:09
80 inch diameter?	Pneumaticsman	Technical Discussion	4	15-01-2008 08:54
3 inch Mechanums	CraigHickman	Inventor	1	21-09-2006 19:18
Going over 6 inch step with 12 inch wheels	Joe P	Technical Discussion	25	12-04-2004 11:15
14 inch bar?	hi_im_sean	Rules/Strategy	2	29-01-2003 15:35