Closed circuit

[vansivallab]

is there any way of creating a closed circuit pneumatics?
so what would happen would be that u would flip a switch and it would go up

or is there a substitute for the micro controller that would go on the robot?

[j_johnso]

Yes, there is. The RC sends a small signal to the spike which sends a larger +12 volt output to the pneumatic solenoid. If you were to hook the solenoid to +12V directly, or even with a switch in between, it should work fine.

The switch must be able to handle the current (number of Amps) that the solenoid requires. I don't have the specs off hand, so
i don't know what that value is.

This would be against the FIRST rules, so you would not be able to do this for a competition, but it will work to test, or if you are using pneumatics for another purpose.

[EricH]

Originally Posted by vansivallab

or is there a substitute for the micro controller that would go on the robot?

The RC? or the Spike? Either way, the only way you could use something else would be as a slave to the RC...and certainly not in place of a Spike.

The only control system you can use is the one in the KOP--RC, OI, Victor 884s, Spikes.