|
|
|
 Who wants to see your robot get their butt handed to them? - Joe_Widen [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Who wants to see your robot get their butt handed to them? - Joe_Widen [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
toughbox related question...
ok so on the toughbox motor there are the red & black cables... if i switch them will the motor function in reverse with no problems?
|
|
#2
15-02-2008, 17:11
|
|||
|
|||
|
Re: toughbox related question...
I assume you're referring to a CIM?
Last edited by Jaybee1405 : 15-02-2008 at 17:32. Reason: nvm |
|
#3
15-02-2008, 17:13
|
||||
|
||||
|
Re: toughbox related question...
If you are running to a victor it will not work...but if you are running straight to a battery it will run in reverse
|
|
#4
15-02-2008, 17:16
|
||||
|
||||
|
Re: toughbox related question...
If you switch the wires that run from motor to victor it will work fine. If you switch the wires that run from the breaks to the victor it will not work. The motor itself does not care which direction power is fed to it but the victor does.
As a note you should be able to fix the problem just as easily in code as you can in hardware and then you won't have to mismatch the motor wires. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Toughbox broken | Evert | Kit & Additional Hardware | 5 | 05-02-2008 23:43 |
| Toughbox Assembly | mjgard | General Forum | 39 | 16-01-2008 19:27 |
| Gearbox -physics related question | sporno | Motors | 37 | 21-09-2007 12:17 |
| Who can be a mentor? (Not FIRST rules related but a general life question) | Elgin Clock | General Forum | 4 | 11-12-2006 18:01 |
| DHTML question, not related to the robot | robot180 | Website Design/Showcase | 4 | 19-04-2003 21:26 |
Hybrid Mode
