New compact rio OI?

excel2474 · #1 01-10-2008, 17:10

Do we use for an Operator Interface in 2009? I can't find any info on this. Do we plug our joysticks into a laptop or something? If we do, what kind of laptop do we use? Also, is there a defult code I could look at? If not, when does it come out? Thanks for the answers.

EricVanWyk · #2 01-10-2008, 17:17

A new driver station will be provided in the kit of parts. I believe 1629 did a good job of showing it in their youtube video. Thanks to 1629 for the video and Neofra for the easy to find link!

excel2474 · #3 01-10-2008, 17:28

Thanks, that's exactly what I wanted. Do you happen to know if I can get the default code for this in eather c or c++?

ComradeNikolai · #4 01-10-2008, 17:37

The default code has not been released yet; it will be released after the beta test is finished, most likely not before.

biojae · #5 01-10-2008, 20:46

C++ Using Windriver, or Labview, both are provided with the cRio.
Attached is a picture I took of the user module.

AndyB · #6 02-10-2008, 14:53

By the way, new OI asthetically looks very nice. As does the digital side car cover.

billbo911 · #7 28-10-2008, 14:21

Quote:

Originally Posted by biojae

C++ Using Windriver, or Labview, both are provided with the cRio.
Attached is a picture I took of the user module.

Thanks for the picture. Although, it is not too clear, it looks like we may have:
2 USB connectors, 4 analog inputs, 6 digital inputs. Is this correct? If so, are the analog inputs the same as previous years, or can we connect anything that will provide a voltage within a certain range? Is it 6 or 8 digital inputs?

Joe Ross · #8 28-10-2008, 14:41

Quote:

Originally Posted by billbo911

Thanks for the picture. Although, it is not too clear, it looks like we may have:
2 USB connectors, 4 analog inputs, 6 digital inputs. Is this correct? If so, are the analog inputs the same as previous years, or can we connect anything that will provide a voltage within a certain range? Is it 6 or 8 digital inputs?

See here: http://first.wpi.edu/FRC/driverstation.html That site has the specs for everything.

billbo911 · #9 28-10-2008, 16:10

Quote:

Originally Posted by Joe Ross

See here: http://first.wpi.edu/FRC/driverstation.html That site has the specs for everything.

Ah yes, exactly what I was looking for.

Thanks Joe!!!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Compact rio not being able to use C	kenethare	Programming	47	10-09-2008 22:33
compact transmission	Aren_Hill	Technical Discussion	16	26-12-2007 02:22
pic: 1565 Compact Version	T3_1565	Extra Discussion	2	04-02-2007 20:37
Servo Compact Design Problems!!!	Dominator_Legen	Electrical	22	07-04-2005 18:15