pic: 6wd chassis

[spc295]

loading photo ...

[sdcantrell56]

This is an excellent job of listening to advice and incorporating the changes to make a superior product. Overall I think this is a great design so far. How thick are the plates? It looks like 1/8".

[spc295]

why thank you, but i still need to make a change i realized that by moving a standoff in order to cut the corners of the chassis it will now get in the way of the wheels

[gorrilla]

(edit) i looked at the other picture, answered my question

[ironbears]

to keep it safe and save money try to use 1/4" plate. looks great

[sdcantrell56]

How would 1/4" plate save money over 1/8" plate?

[gorrilla]

also it is steel or aluminum?

[R.C.]

Originally Posted by gorrilla

also it is steel or aluminum?

Aluminum if it is a 1/4" inch or 1/8" plates. No STEEL unless it is that really awesome thin-wall stuff.

[Cory]

Originally Posted by sdcantrell56

How would 1/4" plate save money over 1/8" plate?

It wouldn't.

[Andrew Schreiber]

Originally Posted by Cory

It wouldn't.

Well, it would if you kept breaking it and having to replace it. Obviously you need to make sure that 1/8 is strong enough to do what you want. You do NOT want to be burning money having to replace parts because they werent designed properly.

[sdcantrell56]

1/4" thick is always more expensive because it is more material. In the age of bumpers, a properly supported 1/8" plate will more than stand up to the abuses of FIRST. If you want to increase the strength substantially without increasing weight by too much you could bend the plates on the top and bottom to create a flange. This will increase the stiffness of the plate dramatically.

[JVN]

Originally Posted by sdcantrell56

1/4" thick is always more expensive because it is more material. In the age of bumpers, a properly supported 1/8" plate will more than stand up to the abuses of FIRST. If you want to increase the strength substantially without increasing weight by too much you could bend the plates on the top and bottom to create a flange. This will increase the stiffness of the plate dramatically.

Flanges are pretty awesome things. Here on 148, we like them. If you have access to sheet-metal or metal bending capabilities, it will help you make all kinds of very strong, very light pieces.
To paraphrase Ferris Bueller:
"They are SO choice. If you have the means, I highly recommend adding a few."

[kramarczyk]

If you have the patience to dig through it, there are a number of examples on how the location of material affects the strength and stiffness of a beam in this thread. http://www.chiefdelphi.com/forums/sh...ad.php?t=67605

[Brandon Holley]

Originally Posted by JVN

To paraphrase Ferris Bueller:
"They are SO choice. If you have the means, I highly recommend adding a few."

Nice.



And I agree with JVN here...flanges are an awesome way to strengthen something up and keep it light.