|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools |
Rating:
|
Display Modes |
|
|
|
#1
|
|||
|
|||
|
Activation of LabView still not working
Still having problems activating LabView
Thank you for the good help with removing the .txt that was hidden. Just renaming the license file did not change it from a text file until I did as explained here: http://decibel.ni.com/content/docs/D...38Me6fznA5Pp7e Still can’t activate, though. Opening NI License Manager (see end of explanation in link above) shows me that I do not have the FRC Competition entry, even though I downloaded the LabView file yesterday (11-10-08) from the FIRST site . See the attached Word Document that has a screen shot. Now what? |
|
#2
|
||||
|
||||
|
Re: Activation of LabView still not working
Be careful ... there's a small disconnect between the LabVIEW installation and the steps provided on the FIRST page.
the FIRST page says to copy the license file (without the ".txt") into a directory path with C:\ProgramFiles\... but the NI LabVIEW installer (at least on MY laptop) installed the 8.5 software into C:\ProgramFiles(x86)\... Once I noticed that, and copied my license file to BOTH of the "shared" directories, everything worked perfectly. |
|
#3
|
|||
|
|||
|
Re: Activation of LabView still not working
I have uninstalled and redownloaded and reinstalled multiple times and still missing the FRC Robotics Competition entry in the Development System section from the NI License manager from the windows start menu.See the Word document screen shot above in my original post.
am I crazy? thanks to anyone who could help. |
|
#4
|
|||
|
|||
|
Re: Activation of LabView still not working
Quote:
|
|
#5
|
||||
|
||||
|
visit: http://www.usfirst.org/community/frc....aspx?id=10934
(*pay attention to the license file extension...txt...lic*) |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| labview key isnt working! | Sean Raia | NI LabVIEW | 12 | 23-10-2008 13:48 |
| IR Board Not Working (But NOT Fried) | itsme | Electrical | 2 | 18-02-2008 06:11 |
| Not quite an animation, but still... | Mazin | 3D Animation and Competition | 7 | 13-06-2006 22:25 |
| frc_camera not working but labview does | Issues | Programming | 7 | 18-01-2006 19:23 |
| IR Beacon/reciever not working... still... | Ferazel2001 | Programming | 23 | 04-02-2004 23:30 |