|
|
|
 If it wasn't for 47, none of us would be here. - Taylor [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| If it wasn't for 47, none of us would be here. - Taylor [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Dual spoke wheel
Instead of a one set of spokes in the middle of the wheel, I have half a set on each side of the wheel. Its still possible to machine it, one side is simply the pastern on the other side rotated thirty degrees. OD is 4" and the hex on the inside is 3/8" flat to flat.
|
|
#2
12-12-2008, 11:23
|
|||||
|
|||||
|
Re: Dual spoke wheel
Neat! now if you move the outer ends of the spokes more towards the center of the wheel, you'll have a reasonable copy of an old racing wheel design!
|
|
#3
12-12-2008, 14:27
|
||||
|
||||
|
Re: Dual spoke wheel
Very nice! This is similar to our 4" tank tread wheel we developed--took a 4 lb. solid aluminum wheel and turned into just over 1 lb.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| pic: Dual Wheel Swerve-Drive | =Martin=Taylor= | Extra Discussion | 5 | 28-04-2007 01:21 |
| Dual wheel per axle set crab-steer concept | Andrew Schuetze | Technical Discussion | 8 | 21-06-2006 08:55 |
| pic: Dual omni-wheel | Richard Wallace | Extra Discussion | 17 | 05-12-2005 10:38 |
| Bush spoke on FIRST | Ryan M. | Chit-Chat | 15 | 01-11-2004 16:32 |
| White Paper Discuss: Dual-motor, dual-speed gearbox | CD47-Bot | Extra Discussion | 8 | 05-04-2004 19:24 |
Hybrid Mode
