|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Unable to install Wind River
Hi!
Our team successfully installed Wind River on 2 laptops (Dell Latitudes) but when trying to install a 3rd copy onto an IBM Thinkpad, the installer wont even start. It gives an error telling the user to access a log located in C:\Documents And Settings\Admin\.wrinstall-12\, but the directory is inaccessible. Now the laptop has been checked for sufficient space, and the content related to Wind river from the first CD provided with the KOP has been successfully installed. As the laptop stands it has about 6GBs of free space, 2GBs of RAM, and runs WinXP Pro. We tried launching the setup directly from the CD as the AutoRun does not activate from the setup.exe and the setup.bat but the same error comes up. We also tried to continue the instllation from the first CD to the second, but the same error comes up. We did notice that there was a C;\Windriver\ folder that was created by the installation processes from the first CD but that just contains documentation and such. If anyone has a suggestion, any help at all is greatly appreciated. |
|
#2
|
|||||
|
|||||
|
Re: Unable to install Wind River
I assume you have administrator privileges on the Thinkpad?
It could be something blocking it on the laptop, such as, an anti-virus program. It could be the install disk needs to be cleaned. You might test the second install disk, even if you aren't planning on using Wind River it could give some useful information and help isolate the trouble you're having with Disk 1. |
|
#3
|
|||
|
|||
|
Re: Unable to install Wind River
Hello, thank you very much for your suggestions. It seems that I have administrator access of the account I was using named "Admin", but my problem was resolved after I forcefully logged off my current account and installed the software using the account specifically called "Administrator."
Hope this helps someone else avoid a couple of hours of frustration. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| SVN wind river | Mr.Macdonald | C/C++ | 3 | 13-01-2009 12:40 |
| build in wind river | Pneumaticsman | C/C++ | 3 | 12-01-2009 15:54 |
| Wind River header issues | dpeterson3 | C/C++ | 6 | 11-01-2009 18:17 |
| Wind River Help | BenB | Programming | 3 | 02-01-2009 21:42 |
| Open Wind River | excel2474 | Programming | 12 | 31-12-2008 17:36 |