|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
AndyMark Tough Box?
Are Teams allowed to use 2 additional AndyMark Tough box transmissions an their robot, bringing to total up to 4?
|
|
#2
|
|||||
|
|||||
|
Re: AndyMark Tough Box?
As long as the part is accounted for in your final robot cost, you can use as many ToughBoxes as you'd like.
|
|
#3
|
||||
|
||||
|
From what I gathered they said we could only use 2 additional tough boxes. So can we use as many as we want or not?
|
|
#4
|
|||||
|
|||||
|
Re: AndyMark Tough Box?
As many as you want, as long as you stay within the 3.5k cost limits. However, you are only allowed 4 CIM motors. Other motors can be used with the toughboxes however, most notably the fischer-price motor through the Andymark planetary.
|
|
#5
|
|||
|
|||
|
Re: AndyMark Tough Box?
Quote:
You can use a maximum of 4 CIM motors, (2 included, and 2 you buy), so maybe someone is conflating CIMs with Toughboxes. What other kind of motor would you want to use with a Toughbox? |
|
#6
|
|||||
|
|||||
|
Re: AndyMark Tough Box?
As suggested above, an FP with an AM Planetary. You could customize other motors to go into a Toughbox (or other AM gearbox), but most people don't.
|
|
#7
|
||||
|
||||
|
Re: AndyMark Tough Box?
Quote:
![]() And yea, I know about stackerboxes ![]() |
|
#8
|
|||||
|
|||||
|
Re: AndyMark Tough Box?
For your drive system, it would be best to use the CIM's, but on appendages, shooters etc. it's not horrible to use a FP with a planetary on it. Just remember, FP's are delicate motors, if you vary the speed too much you will be likely to burn them up. (same with all air cooled motors)
|
|
#9
|
|||||
|
|||||
|
Re: AndyMark Tough Box?
Quote:
There are no limits on the number of Toughboxes you can use other than the cost limit of additional parts. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| tough box bearing problem | matt91 | Motors | 6 | 07-01-2009 13:08 |
| TOUGH BOXES | team550 | Kit & Additional Hardware | 13 | 05-03-2008 15:45 |
| Tough Box with 2 CIM's | Andrew Y. | Motors | 8 | 12-02-2008 08:57 |
| Future of Education: Tough Choices or Tough Times | Rich Kressly | Math and Science | 0 | 21-12-2006 09:10 |
| AndyMark sponsors Team in a Box Version 3.0 | OZ_341 | General Forum | 17 | 03-12-2006 23:10 |