|
|
|
 FIRST already has 494 Martians, plus 70 more. - GaryVoshol [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| FIRST already has 494 Martians, plus 70 more. - GaryVoshol [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Connecting to the cRIO
Right now, we are downloading code to our robot through the connections as described in the Control Systems Manual. We are able to transmit the code from the computer wired to the DS, which is wired to the router, and connecting the wireless bridge to port 1 of the cRIO.
Is it possible to communicate from the laptop to the router wirelessly, or do we have to have a hard connection as described above? This is not for the competition; this is only for our own purposes. |
|
#2
30-01-2009, 10:58
|
|||||
|
|||||
|
Re: Connecting to the cRIO
As long as your laptop is capable of connecting to the 802.11n router, you should be fine. Having the 10.x.y.6 IP address is still necessary if you want to receive Dashboard data.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Trouble connecting to cRIO? | darty | Programming | 17 | 31-01-2009 16:15 |
| Connecting to cRio, getting the jaguars to go solid yellow.... then nothing. | DSST\neal.ian | FRC Control System | 11 | 30-01-2009 18:15 |
| Connecting Axis camera to cRIO | laultima | FRC Control System | 20 | 21-01-2009 16:56 |
| Help! Connecting CRIO to the Power Block | RyanJK | Electrical | 3 | 07-01-2009 17:28 |
| Connecting Power Distribution block to cRio | Paul Rodi | Electrical | 2 | 05-01-2009 18:20 |
Hybrid Mode
