Problems after 3rd update applied

[pheisinger]

We had the cRIO, a Jaguar, Victor, etc. working in a test rig with the 1st update. Tore everything down, put it on the robot, and applied update 3 (Labview)

Now Jaguars and Victors just blink. RSL light on sidecar is on solid.
We've doublchecked driver station version and reapplied download to cRIO.
No change.

Is anyone else having similar problems?

[popo308]

Originally Posted by pheisinger

We had the cRIO, a Jaguar, Victor, etc. working in a test rig with the 1st update. Tore everything down, put it on the robot, and applied update 3 (Labview)

Now Jaguars and Victors just blink. RSL light on sidecar is on solid.
We've doublchecked driver station version and reapplied download to cRIO.
No change.

Is anyone else having similar problems?

We had this problem with update #2... When it happened to us we just re-downloaded the CRIO image and it worked.

I guess something went wrong when it was updating the image the first time around.

Try that out

[gwilliam]

We're having the same problem. I just reimaged the cRIO and reloaded a program and we still have blinking Jaguars and a solid light on the breakout box. Any ideas?

[chmp09]

First of all what is the battery displaying on the DS?

If it says no comms, then make sure that your DS and cRIO are set to your team number. When you updated you DS, it should have reset the team number to 0000.