pic: Custom Wheels

[=Martin=Taylor=]

loading photo ...

[Kyle Love]

Nice shooter wheels.

[RyanN]

What do I think?

Umm... bad year to decide to make your own wheels...

Oops.... You mean 'those' wheels. They look aluminumy... Someone spent a lot of time either making those or watching them be made assuming you did it on a lathe.

[Woodworker88]

Originally Posted by RyanN

Oops.... You mean 'those' wheels. They look aluminumy... Someone spent a lot of time either making those or watching them be made assuming you did it on a lathe.

Those toolpaths look like it was done on a CNC mill or rotary table. Nice work, you guys.

[=Martin=Taylor=]

Originally Posted by Woodworker88

Those toolpaths look like it was done on a CNC mill or rotary table. Nice work, you guys.

Our team doesn't have the milling abilities to do these, so we had a sponsor mill them out. Then our students finished them up on the lathe.

They are by far the most complex/coolest looking parts we’ve ever made!

To give you some proportions they are 6" OD.

They are actually fly-wheels/roller-hubs. Hopefully they'll allow us to fire vast quantities of balls very quickly without losing speed and range.

[R.C.]

Originally Posted by Hachiban VIII

Our team doesn't have the milling abilities to do these, so we had a sponsor mill them out. Then our students finished them up on the lathe.

They are by far the most complex/coolest looking parts we’ve ever made!

To give you some proportions they are 6" OD.

They are actually fly-wheels/roller-hubs. Hopefully they'll allow us to fire vast quantities of balls very quickly without losing speed and range.

And i thought your guys 07 arm was a beast. I can't wait to see that crazy shooter. Have a great build season and see you at DAVIS.

[amariealbrecht]

wow your shooter is going to be great! I hope everything continues to go well for you this year and good luck at all your competitions!

[MrForbes]

Originally Posted by Hachiban VIII

They are actually fly-wheels/roller-hubs. Hopefully they'll allow us to fire vast quantities of balls very quickly without losing speed and range.

We have a very low inertia shooter driven by one CIM with about 1.5 reduction, and we don't have any trouble with shooter speed dropping when it shoots out 5 balls in rapid succession on full speed. We do notice that the motor slows down a bit when we have the speed reduced for shorter range, but I think if we get a speed sensor on the shooter wheel and set up a feedback loop to keep speed constant, it will be fine.

Very nice shooter wheels! what's the weight?

[=Martin=Taylor=]

Originally Posted by squirrel

We have a very low inertia shooter driven by one CIM with about 1.5 reduction, and we don't have any trouble with shooter speed dropping when it shoots out 5 balls in rapid succession on full speed. We do notice that the motor slows down a bit when we have the speed reduced for shorter range, but I think if we get a speed sensor on the shooter wheel and set up a feedback loop to keep speed constant, it will be fine.

Very nice shooter wheels! what's the weight?

You appear to have misunderstood me when I said "vast quantities of balls very quickly." Think 10 balls in a fraction of a second

We actually modeled our shooter using rotational momentum, and imagined that the balls being fired were "collisions" slowing the wheel down. Adding the flywheels greatly improved consistency. Recharge went from about 1 second down to like .2 seconds. Of course we'll have to see about my math

They weigh 2.5 lbs. each. We know how much the final bot will weigh from CAD and this is a perfectly acceptable amount for us.

[MrForbes]

Sounds neat! We have trouble getting more than 5 balls per second into the shooter....shooter speed is not the limiting factor

I wonder if there's going to be a fps limit this year like in 2006?

[GaryVoshol]

Originally Posted by squirrel

I wonder if there's going to be a fps limit this year like in 2006?

Hush! Don't give "them" any ideas.

[XXShadowXX]

how well do they grip the balls, thats one issue I've foreseen, is that your flywheels won't impart enough momentum on the balls in the time that they are in contact, do you plan to say wrap them in Velcro?

[MrForbes]

gum roughtop tread works really well, there are other materials also that can grip the balls well. Velcro affects the fabric on the balls, so it's probably not the way to go.

[=Martin=Taylor=]

Originally Posted by XXShadowXX

how well do they grip the balls, thats one issue I've foreseen, is that your flywheels won't impart enough momentum on the balls in the time that they are in contact, do you plan to say wrap them in Velcro?

They're never going to touch the balls.

We'll use wedge-top or neoprene rubber for traction on the roller surface.

[Andy L]

Originally Posted by Hachiban VIII

You appear to have misunderstood me when I said "vast quantities of balls very quickly." Think 10 balls in a fraction of a second

We actually modeled our shooter using rotational momentum, and imagined that the balls being fired were "collisions" slowing the wheel down. Adding the flywheels greatly improved consistency. Recharge went from about 1 second down to like .2 seconds. Of course we'll have to see about my math

They weigh 2.5 lbs. each. We know how much the final bot will weigh from CAD and this is a perfectly acceptable amount for us.

You have managed to scare me... What's your range like?