Bumper Limits??

saverave · #1 07-02-2009, 19:31

Besides the bumper depth and width limits, is there a limit as to how far off of the ground the robot's bumpers must be (besides the well known fact that they cannot TOUCH the ground b/c they could be considered as being used to increase traction)? I looked in the manual and did not find anything, but that doesn't mean I didn't overlook it...

GaryVoshol · #2 07-02-2009, 19:34

Yes, you did overlook it. Check <R08> P, and the definition of BUMPER ZONE.

AlexD744 · #3 08-02-2009, 22:16

They have to be between 1 and 7 inches off the ground. We made the same mistake but fixed it the next day.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Motor Limits	Idaman323	Programming	20	07-02-2006 00:08
Button # limits?	Fishdude404	Control System	2	24-02-2005 03:56
Camera Limits	Team620	Programming	0	13-01-2005 18:56
Count Limits?	Ephi	Programming	1	04-02-2003 14:25
limits on pnuematics	Ed Crammond	Pneumatics	24	13-01-2003 12:17