Problems with the newest updates...

[koo_04]

So we decited to update the cRIO, DS, and LabVIEW. Well, we have had nothing but problems since. We keep getting the blinking light on the Digital side car. We have elimanated the Watchdog itself problem and the DS is updated correctly. We don't know if the cRIO is though... the update went really quick and puzzled us if it was supposed to go so fast. Please help, we are starting to get really frustrated

[Greg McKaskle]

The reimage of the cRIO should be fifteen minutes or so. Do again, and make sure to check the box to format it.

Greg McKaskle

[rsisk]

Update:

The DS displays

System : Watchdog

when the code is deployed. Have followed the diagnostic steps from the NI website: http://decibel.ni.com/content/docs/DOC-2957

The RSL on the Digitial Side car has a slow blink

The versions on the DS is 2009-02-10a3
The version of Labview is 3.0a
The Imaging tool shows FRC_2009_v11.Zip but as Doug say, cannot confirm that is actually running on the cRIO

[rsisk]

OK, will give that a try Greg, back to you in about 15 minutes.

Any idea how to confirm the version of the image on the cRIO once the update is done?

[rsisk]

Success! Thanks.

Clicking on "Reformat" when loading the cRIO update made it work.


Thanks Greg.