pic: Team 383 - Brazilian Buddy X

Manoel · #1 18-02-2009, 21:04

Mrashes · #2 18-02-2009, 21:04

wait, those scratches are all your bots?!

JaneYoung · #3 18-02-2009, 21:48

haha! I started at the top of Brazilian Buddy X and worked my way down. I was studying the bumpers and started being distracted by circular rings on the floor. Can't wait to see the video.

Good luck to you and the team, Manoel!

Manoel · #4 19-02-2009, 09:41

Quote:

Originally Posted by Mrashes

wait, those scratches are all your bots?!

Yes... Ours and 1772's, who came to our school to practice on Monday and pulled an all-nighter with us.

We barely have enough regolith for the robot to spin in place so any practical driving had to be done on the gym floor. It sure is grippier than the real stuff, but not that much. We'll only find out the real difference at the NASA VCU Regional.

2642 boss man · #5 20-02-2009, 11:23

wow...looks great..i really want to see video on this...

2642 boss man · #6 20-02-2009, 18:54

this year is lookin hard...a lot of great robots goin to VCU..

cziggy343 · #7 21-02-2009, 10:10

it looks very nice, and i hate to be a doggy downer... but you do have another regulation size number to go on the front of the robot right? b/c right now, the two numbers that are on the front are too small. and if you get an observant inspector looking at your robot... you will have to get another one

Manoel · #8 21-02-2009, 12:34

Quote:

Originally Posted by cziggy343

it looks very nice, and i hate to be a doggy downer... but you do have another regulation size number to go on the front of the robot right? b/c right now, the two numbers that are on the front are too small. and if you get an observant inspector looking at your robot... you will have to get another one

Thanks for noticing that, but yes, most of our decals are not installed yet. Big, 60 cm numbers to be put on the front and back of the cylinder.

cziggy343 · #9 21-02-2009, 15:47

Quote:

Originally Posted by Manoel

Thanks for noticing that, but yes, most of our decals are not installed yet. Big, 60 cm numbers to be put on the front and back of the cylinder.

awesome! just wanted to make sure

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thanks to 383 the Brazilian Machine!!	Ken Patton	Thanks and/or Congrats	14	10-04-2005 20:17
pic: #383 Brazilian Buddy VI - Pic 1	Manoel	Robot Showcase	2	07-03-2005 23:03
pic: Brazilian Buddy V teaser 2!	CD47-Bot	Robot Showcase	3	15-02-2004 20:35
pic: Brazilian Buddy V teaser!	CD47-Bot	Robot Showcase	9	13-02-2004 21:31
Brazilian Buddy II (2001 Robot)	Simone	Robot Showcase	2	17-01-2003 19:44