|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
pic: Effective height of the Tunnel
|
|
#2
|
||||
|
||||
|
Re: pic: Effective height of the Tunnel
After seeing this, did you (or anyone) happen to check the actual width of the tunnel?
|
|
#3
|
||||
|
||||
|
Re: pic: Effective height of the Tunnel
Is the tunnel really 36in. wide or 44?
|
|
#4
|
||||
|
||||
|
Re: pic: Effective height of the Tunnel
thanks for the information!
![]() |
|
#5
|
||||
|
||||
|
Re: pic: Effective height of the Tunnel
I'm looking at the diagrams provided in the manual attachments and it lists the inner wall as being 16.5". Is this a discrepancy in the manual or in your measurements? Or am I just completely off-base here?
|
|
#6
|
|||
|
|||
|
Re: pic: Effective height of the Tunnel
I don't know; the tape measure wasn't perfectly straight, but it was fairly close. A question for Q&A maybe?
Again, I wasn't the one taking the measurement and I have no idea who it was, but I would be interested if they had other ideas or took other measurements (of the other tunnel, say. This one may have been assembled wrong). |
|
#7
|
||||
|
||||
|
Re: pic: Effective height of the Tunnel
Quote:
my guess is they will revise the drawings. the rules say 18, changing it to 17.5 is not a huge deal but taking it to 16.5 is a big change. So my guess is that will change. |
|
#8
|
||||
|
||||
|
Re: pic: Effective height of the Tunnel
Quote:
By the way, if someone wants a CAD of the center field pieces (tower, tunnel, bumps) give me a PM and I'll email them to you. (Solidworks 09) Edit: You can also grab them from here. http://www.3dcontentcentral.com/Down...71&id=183867#0 Last edited by James Tonthat : 12-01-2010 at 20:24. Reason: Added link |
|
#9
|
||||
|
||||
|
Re: pic: Effective height of the Tunnel
yeah, I'd like to know the width of the tunnel as well. as in- when going straight through the tunnel- how much room does the robot have from side to side?
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Tunnel Height | JamesByrne | General Forum | 3 | 11-01-2010 17:46 |
| Bumper height v. height of "the bump" | smcmahon | General Forum | 7 | 10-01-2010 21:18 |
| Blocking the tunnel - viable? Worth it? | leafy | Rules/Strategy | 4 | 10-01-2010 14:41 |
| pic: Wind tunnel | Pat Major | Extra Discussion | 20 | 19-02-2009 19:41 |
| how effective are the herders/dumpers? | Mullen | General Forum | 46 | 03-04-2006 21:25 |