Labview issues PLEASE HELP!!!!

Team 748 & 335 · #1 14-01-2010, 16:20

How do you controll the prgram using the FMS Feild mangament system.

Zorkinian · #2 14-01-2010, 19:30

Your question is too generic. Please be a little more specific. What exactly are you trying to accomplish?

Mark McLeod · #3 14-01-2010, 20:56

You can now run a practice match directly from the Driver Station software if that would help.

If you really want to use FMS, do you have the guide to read?
Pretty much you enter the robot team number(s), check to disable any of the unused 6 robot slots, and start.

It won't run if any of the non-disabled robot status indicators are red though. No error message, you'll just click start and nothing will happen.

Joe Ross · #4 14-01-2010, 20:58

Quote:

Originally Posted by Team 748 & 335

How do you controll the prgram using the FMS Feild mangament system.

You would probably have better luck (and less FRC specific answers) if you posted in the FTC forum.

Mark McLeod · #5 14-01-2010, 21:19

Oops, missed the FTC tag.

Please forgive my FRC-centric response.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LABVIEW CODES NOT SAVING!!!!!!! PLEASE HELP!!!!!!!!!!!!	GrammarNazi	Programming	3	06-02-2009 14:26
Interesting and challenging Labview idea - help please	MiniNerd24	NI LabVIEW	2	22-12-2008 17:41
LabView Help Please	NumBeast	NI LabVIEW	3	19-12-2008 15:11
Stretcher/goal issues-- PLEASE HELP ME!	archiver	2001	10	23-06-2002 23:22