The download it does nothing

[unobtainium-42]

I was pleasantly surprised this year to find that WindRiver (seems to) be working properly. I have some problems that might/might not be related to Wind River.

The sample projects and my alterations compile and the FRC downloader seems properly configured with team number & .out file. When I use download it seems to finish successfully. But when I reset the robot, the code hasn't changed. Any idea why it would do that?

I have also properly configured the camera and connected it to the cRIO but the little yellow light on the Ethernet port does not blink and nothing shows up on-screen. Does the robot code need to activate the camera somehow? If so, the previous problem would keep me from finding out. I know almost nothing about the camera and my teammates want it to align the robot for this year's game

Also, why does the Camera to dashboard example not produce a .out file?

[bradleat]

I have some of these same problems, although I cannot debug anything either. But some builds don't produce a .out file and the FIRST downloader does nothing. I am going to try a different computer soon

[keehun]

It took me a very very long time and the setup seems to be very fragile, at least to me. For like the first couple hours of hair-pulling, I realized that it was "Downloading To" a localhost connection that you can see in the lower-left corner. I honestly can't recall what fixed it but your first try may be to remove that localhost connection and only have the robot connection. I will try to look in to it more.

[unobtainium-42]

I deleted the Local Host but it didn't fix the problem. I did some more work today that seemed to confirm the download wasn't working. I tried to use the Run and Debug configurations, but they terminated instantly and the Robot Code light turned red. Interestingly, when I ran the debugger for one project it stopped in a different one

I agree, the setup is very fragile. Why is it that every year I have to jump through dozens of hoops just to get this thing to work? Is this some sort of plot by the GDC?

[byteit101]

Did you set up the Remote System as per the C programming Manual? http://first.wpi.edu/Images/CMS/Firs...artedWithC.pdf

[garyk]

Originally Posted by unobtainium-42

I was pleasantly surprised this year to find that WindRiver (seems to) be working properly. I have some problems that might/might not be related to Wind River.

The sample projects and my alterations compile and the FRC downloader seems properly configured with team number & .out file. When I use download it seems to finish successfully. But when I reset the robot, the code hasn't changed. Any idea why it would do that?

I have also properly configured the camera and connected it to the cRIO but the little yellow light on the Ethernet port does not blink and nothing shows up on-screen. Does the robot code need to activate the camera somehow? If so, the previous problem would keep me from finding out. I know almost nothing about the camera and my teammates want it to align the robot for this year's game

Also, why does the Camera to dashboard example not produce a .out file?

Make sure you are downloading the correct *.out file - if you are downloading the same (wrong) one, the symptom will be that the code never changes.

Please see http://www.chiefdelphi.com/forums/sh...0&postcount=19 and scroll down to "But, we're not done" to be sure you are getting the correct file.

[unobtainium-42]

It was worth a check. Yes, the file path is correct.

Run still does nothing.

I re-imaged the cRIO again and it has no robot code. Let's see if I can change that.

[unobtainium-42]

I used the C:/windriver workspace with only one project and it works. Auto-completion also started working. Before, I was using a workspace on the D:/ drive.

Run/Debug still halt instantly. Here's the trace from the Console Out:

Break at 0x0219d2c4: FRC_UserProgram_StartupLibraryInit   Task: 0x2217cf8 (tFRC_
UserProgram_StartupLibraryInit)
WPILib was compiled from SVN revision 2069
task 0x218a5c0 (FRC_DriverStation) deleted: errno=0 (0) status=0 (0)
task 0x1d62d08 (FRC_RobotTask) deleted: errno=0 (0) status=0 (0)
!!!   Error: Default code was still running... It was unloaded for you... Please
 try again.
task 0x2217cf8 (tFRC_UserProgram_StartupLibraryInit) deleted: errno=0 (0) status
=0 (0)

Using "Undeploy" first did nothing. What's going on?

[byteit101]

Error: Default code was still running... It was unloaded for you... Please
try again

Did you reboot? there is code running, but you need to reboot between sessions