What is the weight and height limit for FRC 2010 Robot?

[xSpongeX]

Does anyone know the weight and height limit for the robot in FRC 2010??

Thanks!

[James Tonthat]

According to the rule book, page 12.

<R10> During the MATCH, the ROBOT will assume one of two operating configurations. When in each configuration, the ROBOT shall fit within the limits shown below (note: these limits are defined in reference to the ROBOT, not the FIELD).
Maximum Horizontal Dimensions
Maximum Height
Maximum Weight
NORMAL CONFIGURATION
Rectangular space no more than 28 inches (71.12cm) by 38 inches (96.52cm)
60 inches (152.40cm)
120 pounds (54.43Kg)
FINALE CONFIGURATION
84 inch (213.4cm) diameter vertical right cylindrical volume
90 inches
(243.8cm)
120 pounds (54.43Kg)

[RyanN]

Originally Posted by xSpongeX

Does anyone know the weight and height limit for the robot in FRC 2010??

Thanks!

I'm not getting on to you, but please read the manual. If you did not read the rule for height and weight, it's pretty apparent that you have not read the manual very well or at all.

This year the rules are very tricky and need to be read carefully before you or your team decides on any final design.

The manual can be found at: http://usfirst.org/roboticsprograms/...nt.aspx?id=452

Also, check this page every few day for rule changes and clarifications: http://usfirst.org/roboticsprograms/...nt.aspx?id=450