|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Jaguars arent working
Hey
i have tried to connect a motor today and all i have got is an orange blinking light (On my jaguar... any jaguar) istead of a green light... i need some help ! thenks... |
|
#2
|
|||||
|
|||||
|
Re: Jaguars arent working
The jaguar needs to have a pwm cable connected to a Digital Sidecar PWM that has been Opened in code actively running on the cRIO and it has to be Enabled by the Driver Station which must have the E-stop button plugged in.
Did you power everything up and connect it all? What are the Driver Station status lights showing. Last edited by Mark McLeod : 19-01-2010 at 08:49. Reason: s -> d |
|
#3
|
||||
|
||||
|
Re: Jaguars arent working
Yoav,
Is the PWM cable attached between the Jaguar and the Digital Side Car? |
|
#4
|
|||||
|
|||||
|
Re: Jaguars arent working
Jinx!
|
|
#5
|
|||
|
|||
|
Re: Jaguars arent working
Everything is connected as showed in the Diagram posted in firstw's site...
should i put a "jumper" as i did when i connected the camera servos? |
|
#6
|
|||||
|
|||||
|
Re: Jaguars arent working
No jumper.
Jumpers are only needed to run servos. What is the status light on your Digital Sidecar doing (solid, long on-quick off, fast bink)? I circled it in red in this photo from AndyMark.biz. |
|
#7
|
|||
|
|||
|
Re: Jaguars arent working
Never mind, we fixed it- there was a problem with the programming..
but thank you all for the quick comments !! Last edited by yoavh360 : 20-01-2010 at 17:16. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| jaguars suddenly not working | Mr. E | Technical Discussion | 1 | 07-02-2009 21:09 |
| Jaguars working with 2.4 Ghz R/C | NOV8R | Technical Discussion | 0 | 09-01-2009 16:15 |
| There arent many specific rules about the human player... | Ashley Christine | Rules/Strategy | 16 | 12-01-2006 15:38 |
| 'read' posts that arent read | mike o'leary | CD Forum Support | 4 | 10-06-2001 11:29 |