Camera code

bladetech932 · #1 26-01-2010, 23:21

OK after finnishing the beta test and making sure all problems were cleaned up nicely i moved on to camera tracking with no success.
Can someone give me an accurate discription of what the default code does as far as tracking the ellipse?
P.S. the reason i am asking is because Reverse engineering the code helps me understand it better.

jhersh · #2 27-01-2010, 01:22

Have you looked at the white paper? http://joule.ni.com/nidu/cds/view/p/id/1568/lang/en

bladetech932 · #3 27-01-2010, 08:29

Yes I have read it and it tells me what the camera is supposed to be doing but not the motors and the gyro
is the gyro indicator from the dashboard supposed to be spinning round and round?
are the motors supposed to be lining up on the target?

jhersh · #4 28-01-2010, 19:21

Quote:

Originally Posted by bladetech932

is the gyro indicator from the dashboard supposed to be spinning round and round?

Only if your robot is.

Quote:

Originally Posted by bladetech932

are the motors supposed to be lining up on the target?

Only if you hold down the joystick button (trigger I think).

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Java/Netbeans Camera Code for Classmate PC and Axis Camera	joshholat	Programming	1	23-01-2010 14:59
Problems Combining Camera Code and Driving Code	cmurdoch	Programming	20	10-02-2007 16:34
problems using gyro/adc code with camera default code	tanstaafl	Programming	7	22-01-2006 23:09
Code error on RC after downloading "bells and whistles" version of Kevins camera code	DanDon	Programming	6	10-01-2006 18:07
Team THRUST - Kevin's Code and Camera Code Combine	Chris_Elston	Programming	3	31-01-2005 22:28