LabView a specification needed..

[chahalaman13]

hey ya all...
actually its my first year working in my school's robotics team and it's our school's second year.....
eventually all the last year programmers graduated and just i have a little question..

How do we store the project into the cRIO after we deploy it?(meaning when we reboot the cRIP the code is lost) i just need a little specification on how to make it stay in the robot or we have to deploy it everytime we reboot the cRIO...
thanx a lot for any help...

VB Stingers
Team#3053

[Mark McLeod]

On the Project Explorer window, away down at the very bottom of the file list, you'll see "Build Specifications" and under that the default name "FRC Robot Boot-up Deployment."

• Right-click and select "Build"
• Right-click and select "Run as startup"

At the end a popup will ask if you want to reboot your robot.
The program won't be active until you do so.

[Ziaholic]

If you bring up the ProjectExplorer window, scroll to the bottom of the cRIO target, and expand the last item (Build Spec's). Right-click on the FRC Robot Boot-up Deployment. There are many options in there ... First you "Build" it. Then you "Set as Startup".

There's also some interesting information under the "Properties" option, but I don't fiddle with them, I just look at 'em ...



[edit] ... nice one Mark ... I should've hit refresh before I replied!

[DonRotolo]

Hey, in my book you both get credit.

Not being a programmer, I went and tried to look that tidbit up...and failed.

[chahalaman13]

thanks a lot guys... i'll check it on monday.. nd thanks again... i really appreciate it..

[Mark McLeod]

Hey, how can any Mark(c) steer you wrong?