pic: 2073 Roughed out Kicker

billbo911 · #1 07-02-2010, 20:11

V_Chip · #2 07-02-2010, 20:14

Looks good

Weight?

Estimated range?

billbo911 · #3 07-02-2010, 20:17

Here is the next step in the progression. With the springs only, and still having the piston limiting the release rate because of the air flow restriction, we are able to consistently hit 17 feet through the air.

Sorry for the flaky image quality, that's what you get from cell phone cameras.

Zholl · #4 07-02-2010, 23:20

Is that a gate latch I see down in there?

billbo911 · #5 07-02-2010, 23:39

Quote:

Originally Posted by Zholl

Is that a gate latch I see down in there?

Yes sir.
Before we settled on it for the latching mechanism, we stressed tested it. We did a straight pull on the latch with a 1.5 in. dia. piston. It literally showed no sign what so ever of flexing or bending. Although, if you look very closely, you will notice that we replaced the brass pivot rivet with a 1/4-20 bolt, just for good measure.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: KICKER FOR 1322	joeweber	Extra Discussion	12	26-01-2010 16:45
pic: Team 1501 Kicker	Wayne Doenges	Extra Discussion	5	23-01-2010 08:05
pic: Pneumatic Kicker Rev_1	professor1212	Extra Discussion	6	17-01-2010 23:07
pic: Pneumatic Kicker Rev_0	professor1212	Extra Discussion	0	17-01-2010 01:15
Team 2073 Finished on time!!	billbo911	Robot Showcase	0	17-02-2009 13:34