Incorporating Our Code Into the Framework

Patrick Levy · #1 11-02-2010, 11:23

We've got our programming written to do exactly what we want but did not use the Framework supplied by FRC.

1. Are we required to incorporate our code into the FRC Framework?

2. If so, how do we do it? We tried to write the same coding inside the framework supplied by FRC but it failed. We could upload to the cRIO but we got no response when we tried to operate the robot.

Thanks!

Patrick Levy
Harding High School
Team 3202

Mark McLeod · #2 11-02-2010, 11:48

It pretty much depends on how you've written your code as to how to integrate it into the framework. We'd have to see it to give recommendations.

There are some basic elements provided in the framework that you'd need to implement in your code to be able to use it as is.
For instance, you need to add the Driver Station communication, e.g., StartCom.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Putting the Compressor into the framework	Team2339	NI LabVIEW	2	31-01-2009 19:32
our own allternative code for the cmu camera	Gili	Programming	16	17-02-2006 00:16
how to convert Easy C code into real code?	TheHolyLancer	Programming	1	29-01-2006 09:09
Bringing in Navigate.zip into the Default code	alexrobotics	Programming	1	24-02-2004 21:42
Inserting Naviagation code into Default code?	actorindp	Programming	3	28-01-2004 18:12