Go to Post An extra week of driving practice and shakedown outweighs a lot of ooo-shiny. - Billfred [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
 
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 17-02-2010, 19:32
adamdb adamdb is offline
Registered User
#1583
 
Join Date: Feb 2005
Location: Parker, CO
Posts: 64
adamdb has a spectacular aura aboutadamdb has a spectacular aura aboutadamdb has a spectacular aura about
Can't reimage cRIO after latest update

We installed the latest updates of Labview, DriverStation, and Netbeans. Of course, when we tried to download a program to the cRIO it told us that we were using v19 and needed v20 (on the cRIO). So we tried to reimage the cRIO with the v20 firmware and can't. We tried it from two different computers that have the latest updates installed, several different network cables, insured that firewalls were off, etc., etc. We had not had any issue reimaging the cRIO prior to this and had reimaged with the v19 firmware several times successfully. When we bring up the Image utility, it does find the cRIO at 10.15.83.2 just like it should. When we select "Format Controller" and the v20 firmware, it says "Connecting to cRIO" and eventually times out and tells us that the IP can't be found. This sounds like a firewall issue, but I'm sure that firewalls are off on both laptops and that everything is configured like it was when we could successfully image the cRIO.

Is anyone else having this issue?
__________________
Adam Bryant
Programming Mentor
Team 1583
Ridge View Academy Rambotics
  #2   Spotlight this post!  
Unread 17-02-2010, 20:06
Mark McLeod's Avatar
Mark McLeod Mark McLeod is offline
Just Itinerant
AKA: Hey dad...Father...MARK
FRC #0358 (Robotic Eagles)
Team Role: Engineer
 
Join Date: Mar 2003
Rookie Year: 2002
Location: Hauppauge, Long Island, NY
Posts: 8,906
Mark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond repute
Re: Can't reimage cRIO after latest update

Do the PCs have multiple network cards, e.g., wireless.
Those should be disabled while you are attempting to reimage the cRIO.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
  #3   Spotlight this post!  
Unread 17-02-2010, 21:07
adamdb adamdb is offline
Registered User
#1583
 
Join Date: Feb 2005
Location: Parker, CO
Posts: 64
adamdb has a spectacular aura aboutadamdb has a spectacular aura aboutadamdb has a spectacular aura about
Re: Can't reimage cRIO after latest update

Yea, we checked that on both laptops 9 or 10 times during the 3 hours we tried to reimage the cRIO.

I'm thinking at this point that we might have to reset the cRIO and restart from scratch.
__________________
Adam Bryant
Programming Mentor
Team 1583
Ridge View Academy Rambotics
  #4   Spotlight this post!  
Unread 17-02-2010, 21:32
SuperBK's Avatar
SuperBK SuperBK is offline
Registered User
AKA: BrianK
FRC #1225 (Amperage Robotics)
Team Role: Mentor
 
Join Date: Jan 2007
Rookie Year: 2006
Location: Henersonville, NC
Posts: 358
SuperBK is just really niceSuperBK is just really niceSuperBK is just really niceSuperBK is just really nice
Re: Can't reimage cRIO after latest update

This happened to us tonight, and it was what Mark said - more than one network. The laptop had a wireless connection that was on, so when it tried to do the image, it went out the wrong connection. Turning the wireless off fixed it. Do ipconfig /all and see if another IP address is listed.
Brian
__________________
Brian K
Team 1225 Robotics Mentor
  #5   Spotlight this post!  
Unread 17-02-2010, 21:40
Radical Pi Radical Pi is offline
Putting the Jumper in the Bumper
AKA: Ian Thompson
FRC #0639 (Code Red Robotics)
Team Role: Programmer
 
Join Date: Jan 2010
Rookie Year: 2010
Location: New York
Posts: 655
Radical Pi has a spectacular aura aboutRadical Pi has a spectacular aura aboutRadical Pi has a spectacular aura about
Re: Can't reimage cRIO after latest update

I ran into this problem with the v20 update. If you have the BlackJagSerialBridge plugin installed, uninstall it. It blocks the update for some reason
__________________

"To have no errors would be life without meaning. No strugle, no joy"
"A network is only as strong as it's weakest linksys"
  #6   Spotlight this post!  
Unread 17-02-2010, 22:03
misko misko is offline
Registered User
FRC #0852
 
Join Date: Dec 2009
Location: California
Posts: 22
misko is an unknown quantity at this point
Re: Can't reimage cRIO after latest update

Quote:
Originally Posted by Radical Pi View Post
I ran into this problem with the v20 update. If you have the BlackJagSerialBridge plugin installed, uninstall it. It blocks the update for some reason
We had a similar problem. The 2CAN plugin also causes an issue.
If you edit the ni-rt.ini file and remove the reference to either the BlackJag plugin or the 2CAN plugin, then the update may succeed. It took 2 tries after I removed the reference, but then it worked fine.
  #7   Spotlight this post!  
Unread 17-02-2010, 22:28
adamdb adamdb is offline
Registered User
#1583
 
Join Date: Feb 2005
Location: Parker, CO
Posts: 64
adamdb has a spectacular aura aboutadamdb has a spectacular aura aboutadamdb has a spectacular aura about
Re: Can't reimage cRIO after latest update

We got it back, but I had to boot the cRIO in safe mode and reformat it, then reboot in normal mode and do the re-image.

Probably just a coincidence that it happened when trying to image with the latest code.
__________________
Adam Bryant
Programming Mentor
Team 1583
Ridge View Academy Rambotics
  #8   Spotlight this post!  
Unread 07-12-2010, 21:26
ksanger's Avatar
ksanger ksanger is offline
Registered User
FRC #0211 (MaK)
 
Join Date: Mar 2010
Rookie Year: 2010
Location: Rochester NY
Posts: 62
ksanger is on a distinguished road
Re: Can't reimage cRIO after latest update

We tried to change the cRIO from C++ to JAVA. cRIO Image Tool would not connect. Had to edit the ni-rt.ini file to take out the reference to the FRC_BlackJagBridgePlugin.out. We also removed the file from the ni-rt/system folder but I don't know if that was necessary. Now we can download code but then we wait for the cRIO to reboot. The driver station says its rebooting, but Netbeans does not reconnect. Are we supposed to use the driver station and Netbeans at the same time?

Last edited by ksanger : 07-12-2010 at 21:27. Reason: added notification
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Can't Find Latest cRIO update!! siriustuck13 Control System 2 17-02-2010 14:04
can't Download code to cRIO oddjob C/C++ 13 14-02-2010 12:27
Can't recompile Default Code after v11 upgrade Travis Hoffman C/C++ 0 31-01-2009 09:53
[wiki]: Update to latest Mediawiki version? cbale2000 FIRSTwiki 2 30-04-2008 12:33
Latest Update Released!! New Rule <PCL 1.1> Rich Kressly General Forum 3 30-03-2005 18:22


All times are GMT -5. The time now is 02:19.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi