Update #12

EricH · #1 19-02-2010, 19:04

Update #12 is out, and located here.

There's a minor tweak to the Jaguar rules in PWM configuration, and a note on BOM convention.

Pausert · #2 19-02-2010, 23:37

Out of curiosity, does anyone know why it was decided that limit switches directly to a Jaguar using PWM is not permissible? I don't really see what sort of trouble it can create.

MrForbes · #3 19-02-2010, 23:50

The general philosophy seems to be that all motors/actuators must be under computer control, and that would not meet this requirement

Jon Stratis · #4 20-02-2010, 02:42

Quote:

Originally Posted by Pausert

Out of curiosity, does anyone know why it was decided that limit switches directly to a Jaguar using PWM is not permissible? I don't really see what sort of trouble it can create.

Under CAN control, the limit switch state can be read by the cRio. Under PWM control, it cannot.

Vikesrock · #5 20-02-2010, 02:58

Quote:

Originally Posted by eagle33199

Under CAN control, the limit switch state can be read by the cRio. Under PWM control, it cannot.

But the bizarre part is that it does not have to be read by the cRIO under CAN control.

I don't understand why a distinction is made on whether it can be read or not.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Update #9 Up	Beth Sweet	Rules/Strategy	1	06-02-2007 17:56
Update #15	ChuckDickerson	General Forum	26	09-03-2006 23:21
Update #14	ChuckDickerson	General Forum	1	02-03-2006 18:17
Update#17	Vincent Chan	General Forum	0	20-02-2003 19:23