How to program a PS3 Controller

chris1592 · #1 24-02-2010, 20:20

Is there anything you have to do internally in the controller to start programming it in LabView?

chris1592 · #2 24-02-2010, 20:53

anyone?

pwnxor · #3 24-02-2010, 21:21

http://www.ps3-hacks.com/file/12
Here is some drivers.

Mark McLeod · #4 25-02-2010, 10:26

No, you should just plug it in.

I don't remember the mapping of the controls, but you can check that in
Start -> Settings -> Control Panel -> Game Controllers
or by using LabVIEW Indicators on the axes and buttons on the Teleop front panel.

semiferger · #5 10-03-2010, 04:29

Quote:

Originally Posted by chris1592

Is there anything you have to do internally in the controller to start programming it in LabView?

I think in order to do that you have to download some software i am not sure but then just do like on the ps3 hold the ps button with the usb cable connected

movax · #6 10-03-2010, 17:36

With the appropriate drivers (BT or USB), it should appear as a standard HID joystick to windows, with the appropriate number of buttons/axes.

Robototes2412 · #7 11-03-2010, 23:24

Using BlueTooth is illegal

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
program 2008 controller system?	dani190	National Instruments LabVIEW and Data Acquisition	1	02-02-2009 17:40
HM55B Digital Compass - How do I program the controller to read it?	RyanN	Programming	12	13-03-2008 00:14
How to conect solenoids to the circuit board. and how to program it...???	arpitshah	Pneumatics	6	13-01-2008 15:06
How Can I Program The FRC Robot Controller To Display My Team Number	jesusescobar	Programming	5	22-01-2007 10:29
2003 Controller Interface Program	CoupeSprinter	Programming	3	15-12-2005 17:32