|
|
|
 but you can rest assured: I have restored the balance by letting the GDC know that I know that they know that you know they have a pattern.
-Leav - Leav [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| but you can rest assured: I have restored the balance by letting the GDC know that I know that they know that you know they have a pattern.
-Leav - Leav [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Drill Modifications
I hope this is an isolated case, but we have had one other transmission come back with a different problem. The drill transmissions were all opened up and modified by our crew of staff and student volunteers to remove the pins that prevented back-driving. Nothing else was suppose to be removed. We did this to about 50 transmissions (a significant amount of time and work) over several days. I apologize for any defects and assure all teams that we will gladly replace /repair any transmission that does not work properly. Call 248-451-2732 if you think you have a problem.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Portable cordless drill press | Gui Cavalcanti | Technical Discussion | 25 | 03-08-2003 22:21 |
| drill motor mounts- again | Jeff Sharpe | Motors | 6 | 07-04-2003 23:20 |
| Emergency drill trade/sell | Anarkissed | General Forum | 3 | 16-02-2003 22:37 |
| A new record for breaking a drill motor | ZacharyD | Technical Discussion | 23 | 16-01-2003 16:58 |
| "Motors and Drive train edition" of Fresh From the Forum | Ken Leung | CD Forum Support | 6 | 29-01-2002 12:32 |
Hybrid Mode
