|
|
|
 I wouldn’t trade this for anything in this world ;-). - Ken Leung [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I wouldn’t trade this for anything in this world ;-). - Ken Leung [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Advanced I/O Settings with Cypress
Our controls captain needs to know if it is possible, if you are using the advanced I/O settings on the classmate, to run the cypress with the classmate.
|
|
#2
31-01-2011, 19:48
|
|||
|
|||
|
Re: Advanced I/O Settings with Cypress
If you are asking about programming the board using the Cypress tools, the requirement is that the tools are on the computer.
I believe the tools are on the Classmate. If not, look on the development computer. Greg McKaskle
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
