|
|
|
 I think there are a ton of teams that would kill for one let alone three engineering mentors (especially one with the knowledge and experience that Rich Olivera has). - XaulZan11 [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Axis Camera on cRIO port 2 vs. DLink Access Point
Hi,
I have our Axis Camera plugged into the Dlink Access Point and I'm able to see the camera image on the Classmate Dashboard. However, when I plug the camera into port 2 on the cRIO, I lose the video on the Classmate Dashboard. What do I need to change in the LabView code in order to make port 2 accept the Axis Camera signal and pass it on to the Classmate Dashboard? Thanks in advance. Kind regards, Mike 
|
|
#2
03-02-2011, 22:28
|
|||||
|
|||||
|
Re: Axis Camera on cRIO port 2 vs. DLink Access Point
The camera needs it's default IP address of 192.168.0.90 when connected to the cRIO port 2.
The camera needs a 10.xx.yy.3 or similar IP address when on the 10. network through the DLink.
|
|
#3
04-02-2011, 08:32
|
||||
|
||||
|
Re: Axis Camera on cRIO port 2 vs. DLink Access Point
We're working on a tutorial about this: plugging the camera into the cRIO versus the Dlink. Look for it next week on the ni.com at http://decibel.ni.com/content/docs/DOC-8923
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
