|
|
|
 I cannot inspire greatness with mediocrity! - Jim Zondag [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I cannot inspire greatness with mediocrity! - Jim Zondag [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Tank drive problems
My team and I are having a problem with our tank drive program. We are use logitect playstation looking controllers. The two axis were set as 2(y-axis) and axis 4. For some strange reason it stop working. Some is preventing us from turning. I noticed that one stick on the controller is makling the robot to move foward. With tank drive i thought that the just moving one joystick will make only one certain side move.... CAN ANY ANYONE HELP ? ? ?
|
|
#2
11-02-2011, 17:33
|
||||
|
||||
|
Re: Tank drive problems
Make sure that the motors are controlled by different axis values. Make sure that you havnt wired the same value. If you upload a VI I will be glad to review it.
|
|
#3
11-02-2011, 18:22
|
||||
|
||||
|
Re: Tank drive problems
your description sounds like arcade drive. verify that you have it set to tank and not arcade drive.
|
|
#4
11-02-2011, 22:51
|
|||||
|
|||||
|
Re: Tank drive problems
Might one side not be working at all? A skid-steer robot will generally go straight if only one side is powered.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
