|
|
|
 The GDC has spoken, we have listened and will follow their ruling. - ChuckDickerson [more] |
 |
|
|||||||
|
||||||||
| View Poll Results: how does your minibot attach to the tower? | |||
| Magnets |
  
|
1 | 25.00% |
| "Wraps-around" pole |
  
|
1 | 25.00% |
| Clamp |
  
|
1 | 25.00% |
| Pulls itself onto pole |
  
|
1 | 25.00% |
| Voters: 4. You may not vote on this poll | |||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
[FTC]: minibot pole travel
does anyone have an "interesting" method of climbing the pole with their minibot?
Our minibot (nicknamed "Chippy") has 2 direct-drive wheels and 2 free-wheels. To climb the pole, Chippy is angled so the direct-drive can pull itself onto the pole and stay on. Right now the direct-drive is on the top half of Chippy (will be changed so one of direct-drive wheels is on the bottom half of the bot. P.S. It IS named after Chippy from Tim and Eric Awesome Show Great Job http://farm3.static.flickr.com/2270/...5ff960.jpg?v=0 Last edited by ABRAXAS : 12-02-2011 at 17:07. 
|
|
#2
13-02-2011, 23:52
|
|||
|
|||
|
Re: [FTC]: minibot pole travel
You'll likely have more hope of getting a response if you post back in the FRC forums. Most people around here aren't building mini-bots. (Excepting the dedicated souls who are doing FTC and FRC...)
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
