|
|
|
 On the one hand, I wouldn’t want to discourage innovation. But on the other, I would want to encourage simplicity. - Jack Jones [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| On the one hand, I wouldn’t want to discourage innovation. But on the other, I would want to encourage simplicity. - Jack Jones [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
No response on Dashboard
With our Dashboard we are not seeing any response with the PWM, GPIO, and Relay indicators despite the corresponding actuators being operation.
We have this problem with both the default Dashboard EXE and our modded one. 
|
|
#2
19-02-2011, 14:28
|
|||
|
|||
|
Re: No response on Dashboard
I'd like it to me noted that the Driver Station EXE works fine, as does the camera feed in Dashboard.
|
|
#3
19-02-2011, 19:45
|
|||
|
|||
|
Re: No response on Dashboard
It may be useful to look at the error code from the unflatten. Determine if there is an issue with the value being sent from the robot, or an inconsistency between what is sent and what is expected.
Greg McKaskle
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
