|
|
|
 Our behavior – both good and bad – is contagious. Set a good example, behave in a mature, reasoned, professional manner and we will find that others around us will too. - dlavery [more] |
 |
|
|||||||
|
||||||||
| View Poll Results: Is your team capable of picking up tubes from the floor? | |||
| Yes |
  
|
334 | 93.04% |
| No |
  
|
20 | 5.57% |
| Not consitantly |
  
|
5 | 1.39% |
| Voters: 359. You may not vote on this poll | |||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Poll: Picking up tubes
How many teams are capable of picking up tubes off the floor?
~GusGus Team 135 The Black Knights |
|
#2
21-02-2011, 22:27
|
||||
|
||||
|
Re: Poll: Picking up tubes
Is there a "not yet" option? hahaha
|
|
#3
21-02-2011, 22:28
|
||||
|
||||
|
Re: Poll: Picking up tubes
Not yet =D
~Tyler Shulaw! |
|
#4
21-02-2011, 22:29
|
|||
|
|||
|
Re: Poll: Picking up tubes
Our plan is actually to pick them up from the floor because at least for us, it is faster than going back to the Feeder. We can do both though.
|
|
#5
21-02-2011, 22:35
|
||||
|
||||
|
Re: Poll: Picking up tubes
are you planning on throwing the tubes over the wall or through the feeder?
~GusGus Team 135 The Black Knights |
|
#6
21-02-2011, 22:57
|
||||
|
||||
|
Re: Poll: Picking up tubes
It is in our claw design and we just have to make it work
 so not yet. |
|
#7
21-02-2011, 23:31
|
|||
|
|||
|
Re: Poll: Picking up tubes
Our hope is that we can throw the circle and square almost 100% of the time down into the saftey zone, which we shouldn't have to leave, and we can just pick them up and hang them. We can't manage to throw the triangle as well, so we go to the Feeder to grab it.
|
|
#8
21-02-2011, 23:38
|
||||
|
||||
|
Re: Poll: Picking up tubes
Quote:
|
|
#9
21-02-2011, 23:40
|
|||
|
|||
|
Re: Poll: Picking up tubes
Quote:
|
|
#10
22-02-2011, 13:42
|
||||
|
||||
|
Re: Poll: Picking up tubes
We can consistently pick up tubes off the floor. If it's within reach of our grabber we can pick a tube off the floor and retract our arm within 3/4 of a second(.75).
Once retracted, the arm and tube are complete inside our machines frame keeping it safe and secure from being knocked off, or our arm damaged inadvertently by other robots. Now if we can only score that quick and easy. LOL! (it's a work in progress) |
|
#11
22-02-2011, 14:22
|
||||
|
||||
|
Re: Poll: Picking up tubes
We pick up tubes extremely well, If we did it any better we would crush the tubes lol.
|
|
#12
22-02-2011, 17:58
|
|||||
|
|||||
|
Re: Poll: Picking up tubes
Our gripper literally just sucks the tube up and holds it in a consistent position no matter how much it is hit. It uses a limit switch to make sure we did not suck the tubes in too far.
For us its pretty nice in that there is no real aiming/postitioning (other than driving towards it of course) required to grab the pieces, literally we just move towards it and it suck it up, it doesn't even push it forward if we hit it. Which compared to our previous robots is a really nice feature. |
|
#14
25-02-2011, 21:29
|
||||
|
||||
|
Re: Poll: Picking up tubes
Several years ago we stopped doing pit scouting altogether. If you can't perform on the field, we don't care what you were theoretically designed to do.
We haven't looked back from that decision. |
|
#15
25-02-2011, 21:50
|
||||
|
||||
|
Re: Poll: Picking up tubes
I find pit scouting a method to understand more of how the robot works. Its fine knowing the robot is good, but I can't help but wanting to find the answer to why with the robot in front of me at a pit.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
