Go to Post There are no rules specifically prohibiting the use of cryogenically preserved legumes on the robot. - dtengineering [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
 
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 26-05-2011, 21:29
randomunchies's Avatar
randomunchies randomunchies is offline
Underling
AKA: Kat L
FRC #1261 (Robolions)
Team Role: Student
 
Join Date: Mar 2010
Rookie Year: 2010
Location: Suwanee, GA
Posts: 11
randomunchies is an unknown quantity at this point
Alternatives to Welding?

My team is seriously considering making the change from 8020 to tubing for next season. However, we don't have the resources to weld, and some of our mentors don't feel too great that once we weld something, we won't be able to change it.

I've read around that some teams have made tubing robots without welding, so my main question is:

What are the main methods you guys use to join tubing without welding?

-Kat
  #2   Spotlight this post!  
Unread 26-05-2011, 21:51
Tom Bottiglieri Tom Bottiglieri is offline
Registered User
FRC #0254 (The Cheesy Poofs)
Team Role: Engineer
 
Join Date: Jan 2004
Rookie Year: 2003
Location: San Francisco, CA
Posts: 3,185
Tom Bottiglieri has a reputation beyond reputeTom Bottiglieri has a reputation beyond reputeTom Bottiglieri has a reputation beyond reputeTom Bottiglieri has a reputation beyond reputeTom Bottiglieri has a reputation beyond reputeTom Bottiglieri has a reputation beyond reputeTom Bottiglieri has a reputation beyond reputeTom Bottiglieri has a reputation beyond reputeTom Bottiglieri has a reputation beyond reputeTom Bottiglieri has a reputation beyond reputeTom Bottiglieri has a reputation beyond repute
Re: Alternatives to Welding?

We use gusset plates (typically 1/16" alum) and rivets to hold our tubes together. We cut ours on a waterjet, but you could probably make them on a mill if needed.
  #3   Spotlight this post!  
Unread 26-05-2011, 22:07
randomunchies's Avatar
randomunchies randomunchies is offline
Underling
AKA: Kat L
FRC #1261 (Robolions)
Team Role: Student
 
Join Date: Mar 2010
Rookie Year: 2010
Location: Suwanee, GA
Posts: 11
randomunchies is an unknown quantity at this point
Re: Alternatives to Welding?

Is there a better way to use the gussets other than riveting? Would it be alright if we threaded the holes and used screws?

Thanks Tom!

-Kat
  #4   Spotlight this post!  
Unread 26-05-2011, 22:22
Retired Starman Retired Starman is offline
Registered User
FRC #3573 (Ohms)
Team Role: Mentor
 
Join Date: Jan 2009
Rookie Year: 2003
Location: Stone Mountain, GA
Posts: 157
Retired Starman has much to be proud ofRetired Starman has much to be proud ofRetired Starman has much to be proud ofRetired Starman has much to be proud ofRetired Starman has much to be proud ofRetired Starman has much to be proud ofRetired Starman has much to be proud ofRetired Starman has much to be proud of
Re: Alternatives to Welding?

Threading works fine, provided the tube wall thickness is great enough to get at least 3-4 full threads in. Four threads in 1/8 in. thick aluminum means 32 threads per inch, so a 6-32, 8-32 or 10-32 machine screw should work. Gussets are usually attached with a bunch of fasteners, and all that tapping will not be fun. Installing rivets just requires drilling matching holes in gussets and tubes, then installing the rivets.

Many teams, however, use 1/16 in. wall thickness, in which case you don't have enough metal to do the required threads. At this point, pop rivets work best.

If you need to make a change, parts can easily be disassembled by drilling out the rivets. Takes very little time or effort, and you can reassemble them with more pop rivets.

The teams I have worked with love using rivets. Also, they really save on weight over conventional bolting techniques.

Dr. Bob
  #5   Spotlight this post!  
Unread 26-05-2011, 22:27
MagiChau's Avatar
MagiChau MagiChau is offline
Registered User
AKA: Michael Chau
FRC #0085 (B.O.B. (Built on Brains))
Team Role: Alumni
 
Join Date: Jan 2010
Rookie Year: 2010
Location: Zeeland, Michigan
Posts: 875
MagiChau is just really niceMagiChau is just really niceMagiChau is just really niceMagiChau is just really nice
Re: Alternatives to Welding?

If I recall correctly, our frame is actually bolted/screwed together. I would need to ask one of the frame CAD designers for more information.
  #6   Spotlight this post!  
Unread 26-05-2011, 22:47
Wayne TenBrink's Avatar
Wayne TenBrink Wayne TenBrink is offline
<< (2008 Game Piece)
FRC #1918 (NC Gears)
Team Role: Engineer
 
Join Date: Apr 2007
Rookie Year: 2006
Location: Fremont, MI, USA
Posts: 526
Wayne TenBrink has a reputation beyond reputeWayne TenBrink has a reputation beyond reputeWayne TenBrink has a reputation beyond reputeWayne TenBrink has a reputation beyond reputeWayne TenBrink has a reputation beyond reputeWayne TenBrink has a reputation beyond reputeWayne TenBrink has a reputation beyond reputeWayne TenBrink has a reputation beyond reputeWayne TenBrink has a reputation beyond reputeWayne TenBrink has a reputation beyond reputeWayne TenBrink has a reputation beyond repute
Re: Alternatives to Welding?

If the material is too thin for threads, or if the fastener needs to be removed repeatedly and the space doesn't allow room for a nut and a wrench, you can use a floating nut plate, which can be riveted in place.

Another "nutplate" option is to drill one or two holes into an 8020 sliding nut and rivet that in place. Its kind of a pain in the neck to do, but it works well.
__________________
NC Gears (Newaygo County Geeks Engineering Awesome Robotic Solutions)

FRC 1918 (Competing at Standish and West MI in 2016)
FTC 6043 & 7911 (Competing at West MI and Allendale in 2015)
  #7   Spotlight this post!  
Unread 26-05-2011, 22:49
Hawiian Cadder's Avatar
Hawiian Cadder Hawiian Cadder is offline
Registered User
AKA: Isaak
FRC #0159 (Alpine Robotics)
Team Role: CAD
 
Join Date: Feb 2010
Rookie Year: 2003
Location: Fort Colins Colorado
Posts: 573
Hawiian Cadder is a name known to allHawiian Cadder is a name known to allHawiian Cadder is a name known to allHawiian Cadder is a name known to allHawiian Cadder is a name known to allHawiian Cadder is a name known to all
Re: Alternatives to Welding?

we looked at many solutions for our tube and gusset frame before deciding on rivets. we used 1 by 1 by 1/8 tube with rivets and loved it. we considered bolts, but decided against them because they weighed much more, and also because we wanted the frame to stay absolutely perfectly square once it was put together. large holes tend to have more slop than small holes (at least in our shop) we decided against screws because we didn't want to tap. our 2010 robot had 700 machine screws, and that was something we didn't want to repeat. pop rivets were suggested by one of our mentors and they were excellent. they are easy to drill out if you want to change something, and they are very strong. i think our frame weighed 28lbs. (heavy, but part of the lift support was included and as our first year with tubes and gussets it was way way tougher than needed) i would recommend rivets for sure.
  #8   Spotlight this post!  
Unread 27-05-2011, 01:14
sanddrag sanddrag is offline
On to my 16th year in FRC
FRC #0696 (Circuit Breakers)
Team Role: Teacher
 
Join Date: Jul 2002
Rookie Year: 2002
Location: Glendale, CA
Posts: 8,507
sanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond repute
Re: Alternatives to Welding?

You could also use rivet nuts
__________________
Teacher/Engineer/Machinist - Team 696 Circuit Breakers, 2011 - Present
Mentor/Engineer/Machinist, Team 968 RAWC, 2007-2010
Technical Mentor, Team 696 Circuit Breakers, 2005-2007
Student Mechanical Leader and Driver, Team 696 Circuit Breakers, 2002-2004
  #9   Spotlight this post!  
Unread 27-05-2011, 06:34
IndySam's Avatar
IndySam IndySam is online now
Registered User
FRC #0829 (Digital Goats)
Team Role: Mentor
 
Join Date: Nov 2005
Rookie Year: 2004
Location: Indy
Posts: 3,348
IndySam has a reputation beyond reputeIndySam has a reputation beyond reputeIndySam has a reputation beyond reputeIndySam has a reputation beyond reputeIndySam has a reputation beyond reputeIndySam has a reputation beyond reputeIndySam has a reputation beyond reputeIndySam has a reputation beyond reputeIndySam has a reputation beyond reputeIndySam has a reputation beyond reputeIndySam has a reputation beyond repute
Re: Alternatives to Welding?

Rivets and gussets are easy to do and surprisingly strong. We have also machined framed connectors and epoxied a frame together.
__________________
"Champions are champions not because they do anything extraordinary but because they do the ordinary things better than anyone else." —Chuck Knoll


2015 Indianapolis District Winner
2014 Boilermaker Regional Industrial Design Award
2013 Smoky Mountain Regional Industrial Design Award
2012 Boilermaker Engineering Excellence Award
2010 Boilermaker Rockwell Innovation in Control Award.
2009 Buckeye J&J Gracious Professionalism Award
2009 Boilermaker J&J Gracious Professionalism Award
2008 Boilermaker J&J Gracious Professionalism Award
2007 St Louis Regional Winners
  #10   Spotlight this post!  
Unread 27-05-2011, 07:33
jwfoss jwfoss is offline
Chasing Elegant Simplicity
AKA: Justin Foss
FRC #0558 (Elm City Robo Squad)
Team Role: Mentor
 
Join Date: Aug 2006
Rookie Year: 2003
Location: New Haven, CT
Posts: 588
jwfoss has a reputation beyond reputejwfoss has a reputation beyond reputejwfoss has a reputation beyond reputejwfoss has a reputation beyond reputejwfoss has a reputation beyond reputejwfoss has a reputation beyond reputejwfoss has a reputation beyond reputejwfoss has a reputation beyond reputejwfoss has a reputation beyond reputejwfoss has a reputation beyond reputejwfoss has a reputation beyond repute
Re: Alternatives to Welding?

Since you already have a good understanding of 80/20s T-Slot products perhaps looking into their other products would be a good first step. Using this style connection should allow you to keep a square frame, I would suggest bolting or adding gussets to sections you expect to see more load.

They sell a product called Quick Frame which has many options for connectors and comes in at about half the weight of T-Slot.

80/20 Quick Frame:
http://www.8020.net/Quick-Frame-5.asp

Another Company:
http://www.brunnerent.com/Tools/Port...y=2&strMetaTag

I'm sure there are other options out there as well.
__________________
2003-2006 | FRC 0176 | Aces High - Student
2007-2010 | FRC 0229 | Division by Zero - Mentor in Training
2011-2013 | FRC 2168 | Aluminum Falcons - Mechanical Mentor
2013-20xx | FRC 0558 | Elm City Robo Squad - Mechanical Mentor
  #11   Spotlight this post!  
Unread 27-05-2011, 12:25
DonRotolo's Avatar
DonRotolo DonRotolo is offline
Back to humble
FRC #0832
Team Role: Mentor
 
Join Date: Jan 2005
Rookie Year: 2005
Location: Atlanta GA
Posts: 6,979
DonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond repute
Re: Alternatives to Welding?

By tubing, I am guessing you mean square extrusion? Much of the following applies to round tubing as well.

Gusset plates can be made with a hacksaw and drill. If the tube is in danger of crushing (from nut & bolt) use hard wood (we use oak & maple), pounded into the tube, as an internal support.

Don't be so hard on blind rivets. They are faster to remove than a nut & bolt (want to race me?) and at least as strong. Never ever had one fail.

In some places we leave two of the 4 tube walls intact as 'tongues' we use for fastening. We've also used 3/4" square as an internal splice for 1" square (1/8" walls), as well as 1-1/4" square as an external splice.

We use 80/20 for prototyping, since it's easily adjustable, but move to extrusion for the final robot where it makes sense.
__________________

I am N2IRZ - What's your callsign?
  #12   Spotlight this post!  
Unread 27-05-2011, 12:34
akoscielski3's Avatar
akoscielski3 akoscielski3 is offline
Mentor (1114), Alumni (772)
AKA: Aaron Koscielski
FRC #1114 (Simbotics)
Team Role: Mentor
 
Join Date: Jul 2010
Rookie Year: 2006
Location: LaSalle, Ontario, Canada
Posts: 1,066
akoscielski3 has a reputation beyond reputeakoscielski3 has a reputation beyond reputeakoscielski3 has a reputation beyond reputeakoscielski3 has a reputation beyond reputeakoscielski3 has a reputation beyond reputeakoscielski3 has a reputation beyond reputeakoscielski3 has a reputation beyond reputeakoscielski3 has a reputation beyond reputeakoscielski3 has a reputation beyond reputeakoscielski3 has a reputation beyond reputeakoscielski3 has a reputation beyond repute
Re: Alternatives to Welding?

Quote:
Originally Posted by DonRotolo View Post
By tubing, I am guessing you mean square extrusion? Much of the following applies to round tubing as well.
I pretty sure he means tubing like 1" x 1" with side walls of 1/8. That is what we used this year for our robot, though we did have it welded at my dads shop (biggest sponsor). But you could easily use gussets but it would be heavier than welding them.
__________________
Hall of Fame Team 1114 Simbotics
2013-Present
Host of Simbot Solidworks Series
Team 772 Sabre Bytes
2010-2013

Dean's List Finalist 2013 Waterloo Regional
  #13   Spotlight this post!  
Unread 27-05-2011, 12:51
Mike Schreiber's Avatar
Mike Schreiber Mike Schreiber is offline
Registered User
FRC #0067 (The HOT Team)
Team Role: Mentor
 
Join Date: Dec 2006
Rookie Year: 2006
Location: Milford, Michigan
Posts: 476
Mike Schreiber has a reputation beyond reputeMike Schreiber has a reputation beyond reputeMike Schreiber has a reputation beyond reputeMike Schreiber has a reputation beyond reputeMike Schreiber has a reputation beyond reputeMike Schreiber has a reputation beyond reputeMike Schreiber has a reputation beyond reputeMike Schreiber has a reputation beyond reputeMike Schreiber has a reputation beyond reputeMike Schreiber has a reputation beyond reputeMike Schreiber has a reputation beyond repute
Re: Alternatives to Welding?

397 has done many bent aluminum robot upper structures, although it is not recommended for a chassis because of accuracy and deformation, it is definitely a cool (easyt) way to form a robot.

http://www.chiefdelphi.com/media/photos/30277
__________________
Mike Schreiber

Kettering University ('09-'13) University of Michigan ('14-'18?)
FLL ('01-'02), FRC Team 27 ('06-'09), Team 397 ('10), Team 3450/314 ('11), Team 67 ('14-'??)
  #14   Spotlight this post!  
Unread 27-05-2011, 20:52
randomunchies's Avatar
randomunchies randomunchies is offline
Underling
AKA: Kat L
FRC #1261 (Robolions)
Team Role: Student
 
Join Date: Mar 2010
Rookie Year: 2010
Location: Suwanee, GA
Posts: 11
randomunchies is an unknown quantity at this point
Re: Alternatives to Welding?

How much extra weight would gussets and rivets add to the chassis, as opposed to welding?
  #15   Spotlight this post!  
Unread 30-05-2011, 21:51
Trent B Trent B is offline
College Mentor
AKA: Trent Borman
no team (Surviving Grad School)
Team Role: Alumni
 
Join Date: Dec 2008
Rookie Year: 2008
Location: Ames, IA
Posts: 479
Trent B is a splendid one to beholdTrent B is a splendid one to beholdTrent B is a splendid one to beholdTrent B is a splendid one to beholdTrent B is a splendid one to beholdTrent B is a splendid one to beholdTrent B is a splendid one to beholdTrent B is a splendid one to behold
Send a message via AIM to Trent B Send a message via Yahoo to Trent B
Re: Alternatives to Welding?

Quote:
Originally Posted by randomunchies View Post
My team is seriously considering making the change from 8020 to tubing for next season. <snip>

-Kat
If your main concern with 8020 is the weight, just keep in mind that 8020 is pretty ridiculously as a cross member shape. Also, avoid using brackets if at all possible. Take advantage of end fasteners and anchor fasteners to save weight. Over the past few years of dealing with 8020 I have found that unlike a tubular chassis you need very little cross support to have a sturdy frame, pretty much an outer box is strong enough to hold.

If you have any more questions about lighter 8020 construction techniques feel free to respond/PM/IM etc.
__________________
Former 2502 (Talon) Captain and 3928 (Neutrino) Mentor, currently teamless and attending Penn State for graduate school.
Have questions about Iowa State University or Penn State University? Feel free to email or PM me
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 21:36.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi