New version of the Windriver update posted

[BradAMiller]

There was an error in the installer that was posted for the C++ WPILib update to Workbench. It was missing the WPILib.a library. A new version has now been posted and is available on FIRSTForge.

http://firstforge.wpi.edu/sf/frs/do/...2_update_for_c

Sorry about the mistake.

Brad

[kccowan]

Brad,

I don't see any files when I follow that link.

KC

[BradAMiller]

It's back now. There was an error when I gave it a test. I got nervous and temporarily removed it. It turned out to be an older image on my cRIO, and I replaced the update. Let us know if you have any issues.

Brad

[cjlane1138]

Thanks Brad!

-Collin, 1138

[bob.wolff68]

So I've got the two new .zip files from NI, but they are password protected. What is the decrypt password?

Thanks,
bob

[bob.wolff68]

Ok - the password is the one from kickoff: !HotShots!KnowBalance!

Now...next problem -- I got the program to run and find my cRIO no problem, but I can't find the FRC_2012_*.zip file. Where is it?

Thanks,
bob

[bob.wolff68]

Aha!

So, for C++, Brian mentioned the NI updates in links here....

http://firstforge.wpi.edu/sf/frs/do/...2_update_for_c

but there is also a link at the bottom of that page which is the actual C++ workbench update that contains the cRIO image in it at:

http://firstforge.wpi.edu/sf/frs/do/...h_update_v2993

[scree0114]

How do u decrypt the d link from last years competition?

[BradAMiller]

Plug a laptop via Ethernet into the switch on the Dlink. Then using a web browser connect to it, should be 10.x.y.1. The from the web setup pages turn off WPA encryption.

Brad