|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Do FisherPrice Gearbox Documents Exist?
I am unable to find any documentation for the FP Gearbox included with the KoP that would answer the following questions
1. What is the gear reduction of the Kit of Parts Fisher Price gearbox? 2. What is the maximum output torque of the KoP Fisher Price gearbox? 3. The "Where to Get More" document doesnt list this this part. Where do I get more? It looks like we'll be trying to figure out questions 1 and 2 when we meet tomorrow as was done in the this thread but actual specs from a document would be nice also. |
|
#2
|
|||||
|
|||||
|
Re: Do FisherPrice Gearbox Documents Exist?
Count the number of teeth on each gear, and calculate each stage's ratio as a ratio of tooth count. For example, if the first gear has 25 teeth and the second gear has 75 teeth, the ratio is 25:75, or 1:3. Three turns of the first gear results in 1 turn of the second gear. If on the second gear there is a third gear of 30 teeth, meshing with a 4th gear of 70 teeth, the ratio is 30:70, or 3:7. If you go from the first gear to the 4th gear, the ratio is 3:21 (=1:7), where 7 turns of the first gear results in 1 turn of the 4th gear.
|
|
#3
|
|||||
|
|||||
|
Re: Do FisherPrice Gearbox Documents Exist?
While I don't have the exact number, you'll smoke the FP motor before the gearbox fails.
|
|
#4
|
|||||
|
|||||
|
Re: Do FisherPrice Gearbox Documents Exist?
Quote:
![]() JVN's Mechanical Design Calculator |
|
#5
|
|||
|
|||
|
Re: Do FisherPrice Gearbox Documents Exist?
We used a FP gearbox / motor last year to power our winch. We made many lifts during practice and compentition and never had any trouble
|
|
#6
|
||||
|
||||
|
Re: Do FisherPrice Gearbox Documents Exist?
A little counting and some math.
The FP Motor has a 19T Pinion on it. The FP Gearbox internally is made up of multiple compound gears. Pinion Gear 19T Compound Gear 1 (72T Large / 25T Small) Compound Gear 2 (79T Large / 14T Small) Compound Gear 3 (45T Large / 12T Small) Final Gear (38T Large) Connected as a Compound Gear to the Spindle 19T/72T x 20770 = 6008.75RPM 25T/79T x 6008.75 = 1901.50RPM 14T/45T X 1901.50RPM = 591.58RPM 12T/38T X 591.58 = 186.82RPM AT THE DRIVEN SPINDLE. |
|
#7
|
||||
|
||||
|
Re: Do FisherPrice Gearbox Documents Exist?
Be aware that there are many different versions of the F-P gearbox. The one from the 2011 KOP was one that I'd never seen before, with a differently-shaped black case, and orange slotted output hub.
Old information may well refer to a different version that was not provided in the KOP this year. Getting more has historically been a bit of a pain with F-P parts. The Power Wheels service centres have been ordered not to sell some parts to the general public, presumably for fear of the electrical parts being installed incorrectly. This applies specifically to the motors, but since the gearbox and motor are usually found together, it can complicate matters. |
|
#8
|
||||
|
||||
|
Re: Do FisherPrice Gearbox Documents Exist?
I pulled this year's gearbox apart to get those numbers I posted above.
|
|
#9
|
||||
|
||||
|
Re: Do FisherPrice Gearbox Documents Exist?
Quote:
95% X 3 stages + 90% X one stage with funky bearings = 77% efficiency. 34.4 Ft. Lbs of usable torque, or, 47.7 N m. |
|
#10
|
||||
|
||||
|
Re: Do FisherPrice Gearbox Documents Exist?
Quote:
|
|
#11
|
||||
|
||||
|
Re: Do FisherPrice Gearbox Documents Exist?
We counted 78T on the large gear. I know one tooth won't change the calculations by much, but the engineer in me likes precision so I was wondering if anyone else has confirmed the Alienvin's tooth counts. We confirm the counts of all the other gears.
|
|
#12
|
|||
|
|||
|
Re: Do FisherPrice Gearbox Documents Exist?
Anyone know where to get more? I'd like to have an identical spare.
Last edited by nick1023 : 03-02-2011 at 11:11. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|