|
|
|
 kids under stress poor eating habits even worse food walking around a cold ice rink all day contact with 100s of kids from all over the world = robo flu. Maybe the virus going around is the real "FIRST fever" - Wayne C. [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: Adding more joysticks to the Open vi
Let's check your LabVIEW version first.
On the top menu bar look under "Help" for "About FIRST Robotics Competition Software..." to see if you have Software Update 3.0.0 I've attached pictures of what you should see. If you do not even see the choice then you do not have the LabVIEW update installed. 
|
|
#3
20-01-2011, 00:25
|
||||
|
||||
Re: Adding more joysticks to the Open vi
Found out the problem was in how we started to copy the placed vi's. Seems like we duplicated them. So then we thought we had to modify the VI lib components to get enough I/O terminals.
Now that we know that you don't modify the Libarary VI's we now know where we went wrong.  Thanks for the quick replies
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
