FTC KOP Inventor Files

[ttldomination]

Hello Everyone,

Is there a CAD library for Inventor files for the FTC KOP? I downloaded the PTC KOP, but Inventor is not able to import them.

Thanks,
Sunny

[mplanchard]

You can go to www.3DContentCentral.com

http://www.3dcontentcentral.com/part...brary/140.aspx

Search for FTC. Most of the Tetrix parts are in the library. You can download what you need in Inventor format.

If you have a copy of SolidWorks, the Tetrix models are located inside of Solidworks in the Design Library.

Marie

[ttldomination]

Originally Posted by mplanchard

You can go to www.3DContentCentral.com

http://www.3dcontentcentral.com/part...brary/140.aspx

Search for FTC. Most of the Tetrix parts are in the library. You can download what you need in Inventor format.

If you have a copy of SolidWorks, the Tetrix models are located inside of Solidworks in the Design Library.

Marie

Excellent,

Thank you very much.

- Sunny

[mplanchard]

Sunny

I posted the FTC KOP in SolidWorks format here

http://blogs.solidworks.com/teacher/...olidworks.html

It is easier to get all at once. Marie

[grim]

Marie, is there a similar file in Inventor format? Or at least an easy way to find them all?

[mplanchard]

Todd

I don't make models in Inventor. Aren't you in Leominster?

You can search for each individually on www.3DContentCentral.com search FTC and select Inventor for file type.

Marie

[grim]

I am in Leominster. I was hoping for something easier than finding all the parts and then converting them to Inventor. Autodesk does not appear to have the FTC parts modeled.

I tried the link you had sent in the previous post but it only brought me to a blank blog page.

[mplanchard]

This might have something to do with your browser.
Select page up a few times to get to the tetrix assembly

Marie